TL;DR: In Victoria, rental providers must arrange a gas safety check and an electrical safety check at least every two years. Since 13 October 2026 this applies to every rental agreement, including older ones that used to sit outside the rule. A gas check covers leak testing, ventilation, appliance servicing and a combustion spillage test, and must be done by a gasfitter licensed for Type A appliance servicing.
Victoria’s rental rules changed again this year, and many landlords with long-running tenancies are now covered for the first time. If you own a rental in Melbourne, here’s what a gas safety check involves, how the electrical check fits alongside it, and how to stay on top of both.
What a gas safety check covers
A gas safety check is more than a quick look at the cooktop. Under the Residential Tenancies Regulations 2021 and Energy Safe Victoria’s guidance, it generally includes:
- testing the gas installation for leaks to confirm it is gas tight
- checking there is adequate ventilation for each appliance to operate safely
- servicing gas appliances such as heaters, cooktops, ovens and hot water units, as the regulations require
- carrying out a combustion spillage test on each appliance, in line with the servicing standard AS 4575
checking the installation itself, including isolation valves and clearances
The spillage test matters most in older homes. A heater that isn’t venting properly can push combustion gases, including carbon monoxide, back into the room, and that isn’t something a renter can usually spot.
The check must be done by a licensed or registered gasfitter who holds the Type A gas appliance servicing endorsement. A general plumber without that endorsement can’t sign off the work.
What an electrical safety check covers
Electrical safety checks look at the property’s electrical installation, fixtures and fittings. A licensed or registered electrician assesses them against AS/NZS 3019, the standard for periodic assessment of electrical installations, and provides a report in that standard’s format.
This check sits alongside the minimum standards for rental properties, which also require power outlets and lighting circuits to be connected to switchboard circuit breakers and residual current devices (RCDs). An electrician can confirm both in the one visit.
How often is an electrical safety check required in Victoria?
Both checks are due at least every two years. If no check has been done in the two years before a renter moves in, the rental provider needs to arrange one as soon as practicable.
The bigger change is who is covered. Until 13 October 2026, the two-yearly gas and electrical safety checks applied only to agreements entered into from 29 March 2021. From that date, Consumer Affairs Victoria confirms they apply to all rental properties. Annual smoke alarm checks were extended to all agreements earlier, from 25 November 2025.
Smoke alarm checks are related but separate. They’re due every year, so they won’t always line up with the two-yearly gas and electricity checks for landlords.
Recommendations for gas and electrical safety checks in Melbourne
Check your older tenancies first. If a renter has been in the property since before March 2021, there may never have been a formal check. Those properties are now covered, so they’re the place to start.
Book the right people. Ask for the gasfitter’s Type A servicing endorsement and the electrician’s licence or registration number before the visit, and make sure both appear on the report.
Combine visits where you can. Booking gas and electrical safety checks in Melbourne together, or alongside the annual smoke alarm check, means one access arrangement for the renter and one date to track.
Keep the paperwork. You need to keep the most recent record until the next one replaces it, and give the renter a copy within seven days of a written request. Before signing a new agreement, you also need to disclose the date of the last checks and any outstanding recommendations.
Act on what’s found. A gas leak or dangerous electrical fault is an urgent repair, and rental providers must respond immediately. Non-urgent recommendations still need follow-up, because they’ll show up in your next disclosure.
Plan around upgrades. If you’re planning draughtproofing in a property with gas appliances, a gasfitter needs to check those appliances within the six months beforehand. That can often be combined with the routine check.
A provider that handles gas and electrical safety checks in Melbourne as part of a broader rental property inspection program can keep these dates on one schedule, which is easier than juggling separate trades across a portfolio.
Frequently asked questions
Do gas and electrical safety checks apply to older rental agreements?
Yes. From 13 October 2026, the two-yearly checks apply to all rental properties in Victoria, whether the agreement started before, on or after 29 March 2021. Landlords with long-running tenancies should confirm when their last checks were done and book any that are overdue.
Who can carry out a gas safety check in a rental property?
Only a licensed or registered gasfitter with the Type A gas appliance servicing endorsement. Their name, business details and licence or registration number should appear on the record, along with the date, results and any repairs needed or actions taken.
What happens if the gas safety check finds a problem?
Minor issues are usually listed as recommendations for repair. A gas leak is treated as an urgent repair, so the rental provider needs to arrange it straight away. Keep the compliance certificate or invoice for any follow-up gas work with your safety check records.