Doors, windows, cabinets and gates all depend on hinges. If a hinge breaks, the door can fall and cause injury. To stop this, the Government of India made quality checks compulsory for steel butt hinges. This article explains what the rule means, who must follow it and how a maker can get the license.
Is the BIS License Compulsory?
Yes. A Quality Control Order says that steel butt hinges sold in India must follow the Indian standard and carry the ISI mark. This applies to makers in India and also to foreign makers who send hinges to India. A hinge without the mark can be seized, and the seller can be fined.
Who Needs to Apply?
- A factory that makes steel butt hinges in India
- A foreign factory that sells hinges to Indian buyers
- A brand owner who gets hinges made by another factory and sells them under its own name
Dealers and builders do not need a license, but they should check that their supplier has one.
What Is the Rule Book?
BIS has written a standard for these hinges. The BIS IS Standard for Steel Butt Hinges is numbered IS 1341:2018. It tells makers:
- Which steel to use
- What sizes are allowed
- How the hinge must be made
- How the surface must look
Think of it as a recipe. If you follow it, your hinge will be good and safe.
Which Hinge Types Are Included?
The license covers light weight (LW, LWU), medium weight (MW, MWU), broad (BR), square (SQ) and heavy weight (HW1, HW2) hinges. You list the types you make. Brass and other non-iron hinges follow a different standard.
What Does BIS Check?
BIS looks at two things: your hinge and your factory.
- The hinge: size, material, how it is made and how the surface looks.
- The factory: machines, a small test lab, trained staff and daily records.
A factory with no lab or no records will find it hard to pass the audit, even if its hinge is good.
Steps to Get the License
- Compare your hinge with the rule book and fix any gaps.
- Set up a small test lab with the right instruments.
- Collect papers such as business proof, address proof, machine list and staff details.
- Apply to BIS online and pay the fee.
- A BIS officer visits and audits your factory.
- Samples are tested in a BIS-approved lab.
- If all is fine, BIS grants the license and you can use the ISI mark.
These steps together are called BIS ISI Mark Certification for Steel Butt Hinges. If one step goes wrong, the steps after it get delayed.
How Long Does It Take?
There is no fixed time. It depends on how ready your factory is, how correct your papers are and whether your samples pass on the first try. A failed sample means fixing the problem and testing again, which adds weeks. Foreign makers usually need more time than Indian makers.
What Will It Cost?
You pay BIS for the application, audit and license. Sample testing charges change from lab to lab. You may also spend on lab instruments and small changes in the factory. Ask for a clear cost list before you start.
Five Mistakes That Delay the License
- Applying before checking the hinge against the rule book
- Having no test instruments or poor records
- Sending wrong or missing papers
- Using the ISI mark before the license is granted
- Forgetting to renew the license
Tip for Buyers: Check the License
Do not trust only the ISI mark printed on a box. Ask the supplier for the license number and check it on the BIS website or the BIS Care app. A real license means BIS checks that factory from time to time.
Do You Need Expert Help?
You can apply by yourself. But first-time makers often lose weeks because of small mistakes. A BIS Certification Consultant for Steel Butt Hinges can check your product, prepare your papers and tell you what the BIS officer will look for. This can save time and repeat testing costs.
Conclusion
EVTL India is one of the leading BIS Consultant in India, helping manufacturers obtain their BIS licenses hassle-free. Our team guides you from the first paper to the final license.
If you make or sell steel butt hinges, start early. A little planning now saves a lot of trouble later.
FAQs
1. Is the ISI mark compulsory for steel butt hinges?
Yes, under a Quality Control Order.
2. Can foreign makers apply?
Yes. Foreign makers can apply to BIS to sell in India.
3. Do I need my own test lab? Yes. A small lab in the factory is needed for daily checks.
4. Can I use the mark before the license is granted?
No. Use it only after BIS grants the license.
5. What if my sample fails? Fix the problem and send new samples.
6. How can I check a supplier's license?
Ask for the license number and check it on the BIS website or the BIS Care app.
About EVTL India: Phone +91 95609 35898 | Email [email protected] | Website www.evtlindia.com
