A door hinge costs very little, but selling one without the right license can hold up a whole shipment. Stainless steel butt hinges come under a government quality order in India, so every maker needs to know where they stand.
The Short Answer
Yes. BIS Certification for Stainless steel butt hinges is compulsory under a Quality Control Order (QCO). A QCO says that certain products can be made and sold only if they meet a set quality standard and carry the ISI Mark.
The standard for these hinges is IS 12817:2020, made by the Bureau of Indian Standards (BIS). Rules and dates can change, so always check the latest BIS notice before you plan production.
Who Needs the License?
The BIS Scope For Stainless steel butt hinges is easy to understand: the license is given to the factory that makes the hinges. It is not given to traders or shops.
- Indian manufacturers must get the license in their own factory's name.
- Foreign manufacturers who sell to India must also get a license, and they must appoint an Authorized Indian Representative.
- Traders and shop owners cannot get the license, but they should sell only hinges that already carry the ISI Mark.
What the Standard Checks
The standard looks at the whole hinge, not only one part.
- Steel: The plates must be made from the stainless steel grades listed in IS 6911, and the pin from the grades listed in IS 6528.
- Size: Length, width and thickness must be right.
- Holes: The number and position of the screw holes must be correct, so the hinge fits well.
- Making: The hinge must be well built, and the pin must move smoothly.
- Finish: The surface must be clean and smooth, with no sharp edges or cracks.
How Testing and Factory Checks Work
The BIS Testing Requirement for Stainless steel butt hinges has two parts. First, your hinges are tested in a BIS-approved lab. Second, a BIS officer visits your factory to see how you buy steel, make the hinge and check quality.
Your factory needs a small test area with measuring tools that are checked and accurate. BIS wants to see that you can test your own hinges regularly, not just once for the license.
Steps to Get the ISI Mark
Getting a BIS License For Stainless steel butt hinges takes five steps.
- Collect papers: Factory proof, process chart, machine list, test tool list, staff details, steel supplier details and hinge drawings.
- Apply to BIS: File the application and pay the fees.
- Factory visit: A BIS officer checks your machines, process and quality checks.
- Sample testing: Your hinges are tested in a BIS-approved lab.
- License granted: If everything is fine, you can put the ISI Mark on your hinges.
Common Mistakes to Avoid
Most delays come from small errors that are easy to prevent.
- Sending incomplete or unclear papers
- Having no daily test records in the factory
- Using the ISI Mark before the license is granted
- Making sizes or steel grades that were not listed in the application
- Assuming a trader can apply instead of the maker
Conclusion
EVTL India is one of the leading BIS Consultant in India, helping manufacturers obtain their BIS licenses hassle-free. We check your papers, file the application, arrange the tests and prepare your factory for the BIS visit.
The main point is simple: if you make stainless steel butt hinges, get the license first and sell after. Start by reading the latest QCO notice, then list your hinge types and sizes, and keep your papers ready.
Written by EVTL India, a BIS certification consultancy.
Phone: +91 95609 35898 | Email: [email protected] | Website: www.evtlindia.com
