Ways to pick a floating fish feed equipment
In recent times, with the quick development of the economic climate, the drifting fish feed device has actually followed closely, and also the fish feed pellet equipment has been searched for by everybody. After that there is a issue, that is, just how to choose the drifting fish feed maker Let’s assess the 3 approaches of selecting a fish feed pellet equipment.
1. Methods to select a floating fish feed device.
( 1) Look top quality.
The spray paint on the surface of the shell of the floating fish feed maker must be consistent and firm, and there ought to be no paint leakage, drooping as well as falling off. The chrome-plated parts should be firm as well as brilliantly sleek, devoid of peeling off as well as rust. Stainless steel components should have a smooth surface area, no bumps, as well as ought to be processed with cool sleek patterns.
Related post: floating fish feed machine
( 2) Assembly as well as attachment
Along with examining the fastening of the body and the chassis, the electric motor (or diesel motor) and also the chassis, the drifting fish feed machine mostly inspects the assembly high quality of the design template locking nut and also the pellet cutter, as well as the ring die drifting fish feed device mostly checks Whether the securing screws of the template are tightened. And examine the tightness of the pinch roller brace and also squeeze roller.
( 3) Change the space in between the die and also the stress roller wall surface.
2 layers of paper are packed between the pressure roller and the internal wall of the ring die, as well as it can be taken out with a little pressure. After change, make sure to tighten the changing nut in time as well as mount the protective cover.
After confirming that there are no international items in the shield and the ring die, turn the ring die by hand. At this time, the driven spindle ought to turn quickly, and there is no sticking sensation or scrubing noise.
Related post: https://www.pellet-richi.com/fish-feed-extruder/floating-fish-feed-machine.html
2. Notes:
Straight observe whether there is whipping of the floating fish feed maker ring die during rotation and also whether it will certainly scrub against other parts. Open the monitoring port for feeding the powder into the turning cage and also check whether there is any contaminant in the twisting cage.
Rotate the cage shaft by hand, the cage shaft ought to rotate smoothly and there is no rubbing sound. Continuously open and also shut the ring-molded stockroom door to check whether it is easy to open up as well as close as well as tightly closed.
Certain interest ought to be paid to checking the tightness of the joint and the integrity of the securing. The general demands are: precise positioning, firm securing, as well as no leakage of powder.
After securing journalism chamber door, observe the seam seal of the chamber door from the side. If there is a location where the seal is not limited, the dealing with bolts of the door hinge of the stockroom can be adapted to successfully prevent the leak of powder.
Related post: 20-21T/H Floating Fish Feed Mill
3. Introduction of drifting fish feed machine
The floating feed extruder machine is a feed processing machine that straight presses pellets from crushed products such as corn, soybean dish, straw, turf, rice husk, and so on( 1) Category of floating fish feed pellet equipment
floating fish feed equipment can be separated into ring die pellet equipment, ring die pellet device and also counter-roll pellet machine; according to production, it can be split right into: straw feed pellet device, wheat bran feed pellet equipment, soybean meal feed pellet maker, corn straw feed pellet machine, Sawdust feed pellet maker, etc.
A selection of different floating fish feed equipments are classified according to their appearance and also manufacturing methods.
( 2) Key performance features of drifting fish feed machine
Dual shaft differential stainless steel conditioner, up to 12 points of steam and also 6 points of fluid enhancement;
Integrated pin, easy to keep and repair the bearing housing;
The screw and the primary shaft are connected by involute splines, which are simple to readjust as well as change; visit this page
The barrel is installed with a wear-resistant bushing as well as is equipped with a return water channel, which can be heated/cooled, as well as can additionally straight inject steam or cold water right into the barrel;
Spiral made of special wear-resistant product, large aspect ratio can guarantee continual as well as secure production of sinking/floating feed of different pellet dimensions;
Hassle-free and quick die replacement device and online adjustable reducing gadget;
Particularly suitable for the production of 2 ~ 6mm drifting pellets.
After the product is squeezed out by the floating fish feed equipment, it will certainly develop soft and soft pellets (the moisture content is 25%~ 30%). Currently, it is far better to use pneumatic conveying as opposed to lift.
Due to the fact that the use of elevators can easily create the pellets to be damaged as well as enhance the pulverization price; the use of pneumatically-driven sharing can not only promptly create a layer of colloidal covering externally of the pellets to decrease the fragmentation of the pellets, however additionally round the form of the pellets.
Because of its high wetness content, the product conveyed by pneumatic need to get in the dryer for drying, to make sure that the wetness web content of the product is reduced to regarding 13%.
I really hope the above related web content regarding drifting fish feed device is practical to you. To find out more concerning floating fish feed pellets machine, you are welcome to consult the personnel of Richi Machinery, we will serve you completely!
For details please contact: feed machine
WhatsApp:86 138 3838 9622
Email:enquiry@pellet-richi.com