Is the slow internet speed also making you feel helpless? You are irritated like all the other Wavlink users. We will tell you that it is not just the one reason behind it. Yes, it can be because of the different Setup issues in the device. You will learn here how to practically do it yourself. As it is so easy to improve your internet speed.

To Get The Best WiFi Range Test Your Existing Router

Before you do a Wavlink extender Setup check the speed of the existing router. Though mostly it grabs the speed of 300Mbps in the 2.4GHz band. But in the 5GHz band channel, it grabs the speed of 1200 Mbps. but unfortunately, the 2.4GHz band only runs at 100Mbps speed which can cover only the same room. Though the 5GHz is very good at transferring the signals to all the rooms, its speed coverage is also almost 200 Mbps which can cover around 50 feet. However, If you are an extender 4 and 5 users then, switching to a WiFi 6 could also not be a bad deal.  

Use The Latest WiFi Technologies

You can change the technologies as it is a good way to boost the internet speed. The Wavlink extender has a very fast data transfer speed which is almost three times more than the old extender. For old wireless devices, it can free the old wireless channels to access. 

Use An Extender For Wireless Range

The Wavlink extenders can boost the WiFi signals in the dead spots of the house and office. If you want to elevate the wireless signals to the other floor and you have installed the range extender on the first floor for boosting the signals. 

Swap The Channels

Are you facing connection issues replacing the router from its place could actually help. First, you need to check the configuration of your device. The ISP could not help much; it could only configure the basic settings at the same time. We could remark on the good WiFi speed by checking the settings of the device. 

Your channels are crowded almost all the time around the clock. This one is a network converter. As the data speed is exchanged on the congestion of the WiFi channels. However, if the device is in the default mode then, it will surely get influenced by it badly. 

Although 12 channels are a common usage of every house which a 2.4GHz channel consists of. The WiFi channels overlap with each other and they highly affect the performance of the Wavlink router, therefore the existing extender suffers a lot for the speed. So for a good Wavlink router Setup set up channels 1,6, and 11. Make sure you select the channels manually.  

As we have talked about the 5GHz band channels earlier. Let us tell you again that it is almost equal to 50 channels. The new routers are very compatible as they can decrease channel interference automatically. They are the new version of devices that are available at affordable prices.  

Check and Prioritize Your Internet Plan

The Internet plan could be a problem, and you must be thinking of other things and wasting time on them. Without doing any research if you are taking any internet plan you will definitely face these problems. If your neighbor and you are also on the same networks through the same ISP. That is also a very big mistake. Sometimes you will face this problem, as the network signals will run typically slow. So, check the availability of the plans first, when you are up to buying them for good internet.

Check The Range Of Network

If you are on the wifi.wavlink.com setup process you need to verify the login credentials of the device first. Strong networks are a prior need. When you are in the range of the networks you will manually join the networks. But when you are out of range you will join your original networks automatically. There is an automated mode that can switch you to the original networks if they are behaving nicely. You can also reach the login page through the Wavlink router and extender Login and tweak all the credentials yourself.  

Reset The Device

The password could also be a big reason behind the signal destruction as a wrong password could lead you in the wrong direction. The reset process can quickly help you do that. Therefore, press the button with the help of the pin. After searching for it. You can now fill up the new settings as all the old settings will get erased. The ‘Admin’ needs to be fed in the field of the Username, and ‘Password’ in the empty field of the password.

Through this information, you can do the Wavlink setup. But, if you are up for quick solutions then, just take the full guide on Wavlink router Setup. You can easily reach the portal of the router and extender for this guide.