Top Window Shutters Melbourne Types for Outdoor Uses

Paneled, louvered, board and batten (also known as BnB), and Bermuda shutters are the four most common styles of exterior window shutters Melbourne. A wide range of materials, from medium-density fiberboard (MDF) to vinyl and synthetic foam, to mimicking wood and real wood, are used to make them. As far as shutter materials go, basswood is unrivaled in popularity.

Window shutters Melbourne types for outdoor uses

1. Board and Batten (BnB)

Due to their straightforward design, board and batten window shutters Melbourne—also known as B and B or BnB—have an Old World and rustic feel. One, two, or three boards make up these shutters, and they’re all joined together by a single thin cross panel that runs either horizontally or at an angle. Because they have such a distinctive appearance, they pair particularly well with the following:

Mediterranean
French Country
Cottage
Cape Cod
Ranch

2. Raised panel window shutters Melbourne

Shutters with raised panels have either a single or double raised panel, giving them the appearance of doors or kitchen cabinets. Due to their unobtrusive nature, they may be used in practically any residential setting.

Victorian
Federal
Ranch
French Country
Greek Revival
Colonial
Georgian
Cape Cod

3. Bahama

Louvered shutters are referred to as Bahama shutters or Bermuda shutters. These shutters are normally installed at the top of the window, instead of the sides. They are often utilized in the tropics because of their ability to bring in light and air while still protecting dwellings from storms. They look great on:

Cape Cod
Ranch
Cottage

4. Louvered window shutters Melbourne

In order to let air and light through, louvered window shutters Melbourne are installed at an angle. These seem more elaborate than panel shutters and are a good choice for classically or casually styled houses.

Victorian
Italianate
Ranch
Greek Revival
Federal and Colonial
Georgian
Cape Cod

Fixtures for window shutters Melbourne

Depending on the purpose of the shutters, the hardware attached to them may be just ornamental or fully functional. The most common parts are hinges and holdbacks. Dogs, or holdbacks, are metal (or metal-looking) objects used to prevent the shutter from moving up and down.

Materials for Shutters

When compared to more traditional materials like wood, the price of shutters produced from MDF (which are usually covered by another material like vinyl) is shockingly low. Unfortunately, they tend to enlarge and lose their shape after being exposed to water for any length of time. Low-priced vinyl shutters are often hollow PVC shutters with raw edges that are topped up with end caps. They take on a plastic sheen and eventually become yellow. Cleaning them might become more difficult with time.

1. Synthetic shutters

Window shutters Melbourne made of synthetic foam appear just like wood but are far more affordable. They are impervious to moisture and flame, and they provide superior insulation. Though they are not as light as wood and cannot be stained, synthetic shutters are the best alternative.

2. Wood choices

Faux wood is a suitable substitute for wood because of its rigidity, making it an excellent choice for large, expansive shutters. These are more affordable than wooden alternatives and are available in a wide range of styles. Joints might deteriorate over time if they aren’t well-built.

When it comes to shutters, basswood has surpassed both pine and poplar in popularity. These are versatile since they are built of lightweight, malleable materials that may be painted or stained. However, they are more expensive and do not withstand moisture as well as synthetic shutters.

Why install window shutters?

1. Shutters add value

In terms of design, durability, and cost, Melbourne window shutters are often categorized as high-end items. However, shutters are a valuable addition to any house and may increase its asking price when it comes time to sell. There have been cases when the added value of shutters greatly exceeded the cost of installation.

You can keep your house at a more comfortable temperature year-round with the aid of shutters. And this will save your heating and cooling costs and make your home more energy efficient.

2. A far more secure residence

Tragically, many blinds have dangerous draw ropes that may be strangled by infants and small children. The shutters are secure and safe for kids. They do not have a chord to pull and are long-lasting and simple to maintain. Children’s safety is a major concern in any area with easily accessible windows, so installing shutters is a must.

Shutters are also an excellent option for individuals who are prone to stumbling and falling for the same reasons. It is ideal for use in homes, daycares, and nursing homes.

3. Enhanced privacy levels

It has always been a priority of ours to maintain our privacy without sacrificing the natural light and scenery afforded by our windows. Before shutters, your only options were a few different kinds of vertical blinds. But blinds might obstruct the view, or nets, which have their own set of drawbacks and are hardly a fashion statement.

Window shutters Melbourne may be adjusted to obstruct views and let in a soft, diffused light. This way, you can keep your privacy and safety without sacrificing the view.

4. Temperature regulation

The light, heat, and humidity can wreak havoc on a variety of window treatments. However, when heat, humidity, and intense sunshine might harm or distort other window coverings, such as in baths and wet rooms, kitchens, and conservatories, window shutters are ideal.

It’s also critical to remember that exterior window shutters Melbourne are made to withstand severe conditions. And this implies that indoor shutters won’t fit the bill for outdoor applications. Installing indoor shutters on the outside of your home can lead to rapid deterioration.