Tips About Water Fountain Repair By Sapphire Fountains

If your water fountain is leaking water, the first thing you need to do is to dry it out. Cracks in concrete can sometimes be very small, and you may not notice them while the fountain is wet. However, when the fountain is dry, they will look like small white lines. To clean the cracks, you should use a stiff-bristled brush to remove any dirt. Dirt in the cracks will prevent the sealant from bonding properly.

Proper installation

There are several ways to fix leaky fountains. The first step is to check the water level. If there is a low level, it’s important to add water to the central basin to correct the issue. A low level can also cause the pump to make loud noises or gurgling noises. Another common problem is clogging of the pump or hoses. Trash and debris can clog the hoses and pump.

Before you start repairing a water fountain, make sure that the wall-mounted fountain is properly secured. These are heavy and require some additional reinforcement to prevent them from coming loose. Longer bolts and screws should be used. It’s also best to hire a licensed plumber who knows how to properly secure wall-mounted fountains.

Cleaning the pump

In order to get the best performance from your water fountain, you should clean the pump regularly. This will ensure that debris does not build up in the pump and will also help prevent clogs. First, remove the pump and clean it thoroughly by soaking it in a solution of water and vinegar. Once the pump is clean, remove the fountain’s bowl and scrub it thoroughly with a soft cloth and mild cleaner. This will help keep the fountain’s water flowing freely and prevent mineral deposits from building up.

After cleaning the pump, you should rinse the fountain thoroughly and fill it with distilled water. Then, you can set the fountain back up.

Cracked or broken fountain

Before you attempt to repair a cracked or broken fountain, it is important to drain all the water and allow the cracks to dry. Small cracks can be difficult to spot when they are wet, but they will be white and visible when dry. You should also remove any dirt from the cracks. Excess dirt can prevent the sealant from bonding properly.

First, apply concrete epoxy to the cracks. Mix the epoxy according to the manufacturer’s instructions. Then, use a plastic trowel to level the concrete epoxy. While this process is fairly simple, it requires concentration and practice. During the epoxy application process, ensure you have a good grip on the figurine. Once the epoxy is applied, wrap it around the figurine one revolution at a time. Allow the epoxy to dry for a day.

Leaking water

If your water fountain has started leaking, it may be time to call in a water fountain repair service. These experts can easily diagnose the problem, and provide a quote. Some of these fountains are even available with upgraded features, such as bottled fill stations. If you’re not sure where to start, here are some tips to get your fountain working again.

First, empty the fountain of water. Then, use a fountain cleaning solution that contains a mixture of dish soap and an exterior-grade silicone sealant. This cleaning solution will clean out any cracks and holes, ensuring that your fountain is airtight again.

Algae build up

If you notice a large buildup of algae in your water fountain, you need to take immediate action to clear it. Algae in the fountain will reduce the pump’s ability to circulate water and can even make the pump overheat. In addition to this, the algae will degrade the quality of the water. In order to combat the problem, you should thoroughly clean the water fountain, particularly the basin. To do this, you need to remove the water and scrub the sides with a stiff brush.

You can also buy an algaecide that you can use to clean your fountain. This chemical will foam up the water and remove algae buildup. However, keep in mind that some products can cause damage to your fountain’s material. Algaecide may be harmful for small children and pets, so only use it if you are sure you will not harm the fountain.

Damaged impeller

If your water fountain has a damaged impeller, the impeller will need to be replaced. You can tell that it needs replacement when the blades are spinning on the magnet but not locking. The impeller is located in the center of the pump. To check if the impeller is damaged, gently rock the pump.

The pump requires a power source to function. Without this, the water fountain will not circulate the water. You may have to interrupt the power supply to the fountain. If the impeller is damaged, you won’t be able to use the fountain. If you’re not sure if your impeller is damaged, place a hand on it to feel whether it’s working. If it doesn’t, it’s possible that the impeller is jammed with debris. If this is the case, run the water backwards to remove the debris.