Things you Should Know in Draping Walls With Wallcoverings Barclay Butera
You are thinking about doing wall covering in your home walls but worrying about the walls damage. The solution to this problem is the wallcovering Barclay Butera. With this, there are no more chances of walls damage. There are various substrates in the wall coverings universe, the most common being self-adhesive vinyl.
A perfect installation has different variables, too numerous to cover in one article. We aim to give you information and help you plan, execute a wall covering.
Factor affecting Exterior wall graphic installation
• Variety of surface textures and coatings
Every building is different, and exterior wall wraps can cover many surface textures and coatings. The vinyl adhesives and methods for coating a textured surface can vary from a smooth surface.
Products like 3M’s Envision Line that utilize vinyl and laminate are designed to be heated to 1,000 degrees F. This particular heat gun and roller allows the entire graphic to melt and conform to the wall texture without compromise.
Factors affecting Interior wall graphic installation
• Freshly painted wall
A freshly painted wall is not a suitable installation surface. All paints emit vapors for some time after they dry. This process, called “off-gassing,” must be complete before the graphic is applied to the surface, or the chance of failure becomes very high.
If the paint has not cured correctly and is covered with an impermeable vinyl, the gas will continue to emit and become trapped behind the vinyl and cause adhesive failure. Curing time varies by the paint manufacturer, but a minimum of two weeks should be allowed before the wall is prepped for installation.
Truths about installing indoor or outdoor wall coverings
1. Testing for film adhesion is important
We use a force scale to measure the bonding strength of different SAVs to the wall surface. Using test strips of vinyl, we can find in a 15 minute period which SAV is best for a particular wall surface.
2. Verify sizes and identify the obstruction
A site inspection needs to verify sizes and find potential installation obstructions. Some installations can be executed from the ground or with a ladder; others may require a particular lift, scaffolding, or rigging equipment. A proper site inspection will help reduce the surprises on installation day.
3. Preparation is paramount for a successful installation
As mentioned above, interior walls must be adequately cured. Exterior walls must be free from impurities and may require power washing (1 to 2 days) before installation, allowing the surface to dry thoroughly.
4. Check the sign code
If the surface has not been used for graphics previously, check with the local municipal authorities to ensure you’re within sign code – this process may require an engineer’s review. If the area has been used before, the building owner or manager should know the permitting requirements.
Read the above points and article to get a better idea about wall covering and plan accordingly for your home. Wallcovering of Barclay Butera is the perfect choice for your home. In the end-choose the best thing for your sweet home.
