Steps to ensure that your NAS storage performs
A network attached storage upgrade is a wise decision for any growing company. These systems offer greater storage capacity, central file organization and backups, multi-site collaboration, and better data protection than individual workstations or hard drives.
Configuring your NAS correctly is key to ensuring that you have a functional storage system that will last for many years.
Once you have chosen the best NAS system for your company, it is essential to maximize your investment and make sure that your Network Attached Storage performs as intended.
Let’s discuss the best storage deployment practices to configure your Enterprise NAS storage.
Keep the temperature-controlled
Keeping your Enterprise NAS storage in a range of precise temperatures can be challenging – especially with today’s dynamic and unpredictable business environment.
The main culprit is excessive heat. Higher operating temperature causes the drive’s rotational speed to slow down, thus decreasing efficiency and performance.
If your NAS storage is too hot, it may throttle performance as the system works to cool down. The opposite is true as well. If it is too cold, your drive could potentially fail altogether. Knowing the right temperature for your Enterprise NAS storage improves flexibility, lessens risk, and increases the lifespan of the drives.
If you are interested in the best NAS systems, you can check out StoneFly for their AES 256-bit encrypted NAS storage supporting a host of security features like Immutable delta-based snapshots, Write-Once Read-Many (WORM) volumes, Automated storage tiering, and Deduplication.
Keep it clean
Dust accumulation around your NAS fans could indicate that dust is entering your device’s internal systems. Dust can cause system cooling fans and power supply fan failures. These fans are usually located under grills on the back of your device.
Also, inspect the surrounding area and fans regularly. You can clean the dust off the surfaces with a static-free cloth. Also, check the air handling in the room. You can reduce dust by using air filters as well.
Use good cabling
Storage network design starts with the network topology. If the configuration process is not set up correctly, it will slow your data traffic and increase errors. However, even more than that, using high-quality cabling is one of the most overlooked aspects of network design. Poor or incorrect cable can lead to interface errors, high latencies, and high bit error rates (BER). Design your storage infrastructure with standard switched 10GBase-T copper cables, Cat6a cables for 10GbE/ 40GbE interfaces, or used MTP trunk cables to enable flexible architecture for NAS device connectivity.
Configure your IP correctly
Miss-configured IP addresses on NAS storage are a common issue. Ranging from minor inconveniences to total network unavailability, this little mistake can cause some significant downtime.
Your IP address is a unique identifier for your Ethernet interface. The protocol to use a network has to match what is specified in your configuration.
For example, the NAS storage needs to connect to IPv4 over Ethernet with TCP as the protocol. If it is configured as IPv6 over Ethernet with UDP, it will not connect to the network.
A flaky network means lost time and lost money. Ensure you have the proper IP addresses enabled in your NAS storage for fast access and secure data migration.
0
