Organic fertilizer pellet making device for high dampness materials
High-moisture product natural plant food quickly natural fertilizer pellet making machine is additionally called damp mixing tooth natural plant food pellet making device, internal turning stirring tooth granulator, this granulator is a plant food pellet making machine
Damp natural plant food granulator is commonly made use of in the granulation of natural plant food. As a result of the high granulation price, secure operation, sturdy and resilient devices, long service life, as well as secure base style, it runs a lot more smoothly, so it is selected as the optimal product by the majority of customers.
The specifications and also models of the damp natural plant food pellet making equipment are 400, 600, 800, 1000, 1200, 1500 as well as various other specifications, and also can also be customized according to customer demands.
Related post: organic fertilizer pellet making machine
1. Functioning principle of natural fertilizer pellet making maker
The mixing tooth organic fertilizer pellet making machine uses the mechanical stirring force of high-speed turning and the resulting wind resistant force to make the great powder material continually understand the procedures of blending, granulation, spheroidization, as well as densification in the device, so regarding accomplish the objective of granulation.
The fragment form is round, the particle size is typically in between 1.5 ~ 4 mm, and also the granulation rate of 2 ~ 4.5 mm bits is ≥ 90%. The particle diameter can be changed appropriately by the material mixing quantity as well as the pin rate. Typically, the lower the mixing amount, the much faster the speed. High, the smaller the particles, and the other way around the bigger the bits.
Related post:https://www.richipelletmachine.com/organic-fertilizer-pellet-making-machine/
The mixing tooth natural fertilizer pellet making machine refines the fermented organic basic materials into granules. Compared with the disc granulator, the return is greater, the granules are consistent, smooth, high in toughness and also reduced in water material. The temperature level after forming is about 30 degrees.
After the fermented raw materials are shattered, they are mixed with a mixer to make sure that the wetness material of the product is between 35% as well as 40%. After entering the organic fertilizer pellet making maker, round particles can be refined.
It capitalizes on the fact that natural plant food basic materials are decorated with each other under a particular impact, and the particles generated are rounded, smooth as well as high in strength. Essential ingredients and adhesives can also be included in further improve item high quality.
The organic plant food basic materials ideal for the mixing tooth natural fertilizer making maker consist of: animals as well as fowl manure, garden compost plant food, green manure, sea fertilizer, cake plant food, peat, dirt and also various fertilizer, 3 wastes, microbes and municipal strong waste, etc.
The qualified granulation price of this organic plant food pellet making device is as high as 90% or even more, and it is suitable for a variety of different formulas. This maker is most suitable for direct granulation of organic fertilizer after fermentation, leaving out the drying out procedure and significantly lowering the manufacturing price. For that reason, the stirring tooth organic plant food pellet maker is preferred by the bulk of users.
The organic fertilizer granulator device generated by our company remains in short supply, energy conserving and also environmental management are trustworthy!
Related post:cat litter production line
2. The range of application of organic plant food pellet making device
Turf charcoal, sludge, livestock manure, lignite, fermented straw, and so on are used as resources for natural plant food production and granulation. The above information are based on peat, animals manure, as well as fermented straw, as well as various other resources undergo experimental data.
3. Installation of fertilizer pelletizer maker.
( 1 ) Setup: The organic plant food pellet making device requires to put concrete foundation before installment to assist in the transfer of completed products, and also fix and also weld the organic fertilizer pellet making maker and also the ingrained iron together to prevent the granulator from moving; network steel can likewise be made use of to weld the framework.
Place the granulator under structure; it is additionally feasible to dig a pit for product transport.
( 2 )Commissioning: After the natural fertilizer pellet making maker is mounted, it is essential to check whether the parts of the granulator are attached. Then perform the no-load trial run. Throughout the trial run, there should be no massaging or touching, no abnormal noise, as well as no resonance.
The temperature level of each bearing of the natural fertilizer pellet mill must climb progressively. At the end of the test run, the temperature level of each part ought to not be higher than 50 ℃. There have to be no major deterioration. When the test run is in regular manufacturing, it has to be fed evenly.
( 3) Upkeep of natural fertilizer pellet making device:
a. The bearing is lubricated when per shift. The lubricating oil kind is No. 3 calcium-based grease lubricating oil, and the filling up quantity is 1/3 ~ 1/2. The brand-new lubricating oil need to be changed routinely. The natural plant food pellet making machine bearing need to be cleaned when replacing.
b. Lubricating oil should be included prior to the reducer is made use of. The lubricating oil is usually HJ40-50 mechanical oil, and HL20-30 equipment oil can also be made use of. The oil level of the lubricating oil ought to be within the array shown by the circular oil mark on the maker base.
After the very first refueling procedure for 100 hrs, the brand-new oil ought to be replaced, as well as every 6 months after that, and also the oil must be cleaned up when transforming the oil. read here
( 4) Wearing parts:
a. triangle belt
b. Bearings
c. Mixing head
4. Instructions for use of fertilizer pelletizer
Before starting the natural fertilizer pellet making device, check whether the link of the equipment is loose, and also pay unique interest to whether the mixing head is loose.
The organic fertilizer pellet making equipment is purely restricted to start with tons.
When the organic fertilizer making maker is switched off, stop feeding initially, as well as turn off the power after the material in the maker is entirely released. Lasting shelving is not necessary to get rid of the materials in the body to prevent sticking.
It is purely prohibited for iron blocks, stones, wood sticks and various other sundries to get in the equipment to stop damages to the equipment.
When beginning the primary motor, initial take notice of the tightness of the V-belt. If the V-belt slides when it is as well loose, the natural fertilizer pellet making equipment will not rotate typically.
If it is as well limited, the life span of the organic fertilizer pellet making machine bearing and the V-belt will be impacted. Then inspect whether the rotation direction is appropriate, if it turns in the opposite instructions, stop as well as adjust quickly.
For details please contact: Pelleting Machine
WhatsApp:86 138 3838 9622
Email:enquiry@richipelletmachine.com