Metal Copner Brackets

It’s like protection, And some people Metal Corner Brackets like the kind of like sheen that it gives. – Oh okay. like I’ve got a few different kinds. This one’s just black, I think. But then there’s also a clear guy here. And then this is shimmer or maybe this is the black and this is the shimmer. Yeah, this is the shimmer sleeving. Yeah right. Too bad. You know you, you don’t want this on there, right? – No. – Okay, good. You basically just hold it with one thumb and then start wrapping it around like that. – All right. Easy. – Yeah. – Cool. Now we just give her with the heat gun? – Yeah. 

One thing to note before you start, be careful. If you put too much heat, you can like damage the cable first of all, but you can also just damage the exterior of the para cord. Or if you’re using tech flex, it melts a lot easier than this stuff does. And so you want to always use the lowest heat on your heat gun when doing this, cause it’s really easy on high heat to just like basically destroy your cable or make it look really bad by giving this big dark black spot on it. – Okay. So I was about to give her a 915 degree. – I would not do that. – Don’t do that. – I would not do that. Also. 

This is an aluminum rod. It’s gonna get really hot, really fast. – So at this point, normally what you do is you would keep this like it is, and then you would let it sit for a few hours, ideally, even overnight. And then you can remove the tape and the coil should basically retain its form. – Okay, cool. – So we’ve got a few quails already made. And so once you’re done, you end up with something kind of like this. Yeah. It doesn’t spring. It just adds a little character to your cable. Some people like to have the cable come out like an inch and then have a coil go across most of the keyboard and then the cable comes out. Yeah, it looks pretty, but that’s about it.

I dig it. Yeah. So now that Alex has finished making his nice USB cable, Anthony is going to try his hand at making a PCA connector an extension for your power supply. Have you done this before Anthony? – No. – Perfect. I haven’t either. Unlike the USB cables, which I’ve made plenty of, I haven’t done Metal Corner Brackets any extensions for cables. I’ve been meaning to get into it. And so this is a good opportunity for both of us to learn. – All right. So we’ve got 18 gauge wire, which should handle most graphics cards, pretty comfortably. These are okay. Male and female connectors. Pretty nice just to have them. Yeah. We’ve got these terminals. These are the actual ends. These are basically what actually plugs into your graphics card. It’s not this that plugs in it’s this and this is connected directly to the wire inside this. – Thankfully, we’ve got some crimpy boys here.