Keurig Express Descale Light Stays On: How To Fix
Keurig Express is a popular coffee machine brand that is known for its ease of use and convenience. However, as with any machine, it is not uncommon to run into problems from time to time. One such issue that many Keurig Express users face is the descale light staying on. This can be frustrating and may even prevent the machine from functioning properly. In this article, we will explore why the Keurig Express descale light stays on and how to fix it.
Why Does the Keurig Express Descale Light Stay On?
The descale light on the Keurig Express is designed to alert users when it is time to descale the machine. Descaling is an essential maintenance activity that involves removing mineral buildup from the inside of the machine. Water contains minerals that can accumulate over time, causing clogs and affecting the machine’s performance. Descaling is recommended every three to six months or more frequently if you live in an area with hard water.
When the Keurig Express detects that it’s time to descale, the descale light will start flashing. The user then needs to follow the descaling instructions in the user manual. However, sometimes after the descaling process is complete, the light may continue to stay on, indicating that there is still a problem.
Here are some possible reasons why your Keurig Express descale light stays on:
- Improper descaling: If you did not follow the descaling instructions correctly, some mineral buildup may remain, triggering the descale light.
- Clogged water lines: If mineral buildup has formed clogs in the water lines, the descale light may remain on even after descaling.
- Malfunctioning sensor: The sensor that detects mineral buildup may be faulty, causing the descale light to stay on even when there is no buildup.
How to Fix the Keurig Express Descale Light
- Redescale the machine: The first step is to repeat the descaling process following the instructions in the user manual. This time ensure that you follow them step-by-step and that you run the largest water-only brewing cycle to ensure that all the descaler solution is flushed out of the machine.
- Clean water lines: If the descale light remains on, it’s time to check the water lines for clogs. Turn off the machine, unplug it, and remove the water reservoir. Use a paper clip or toothbrush to clean out any clogs in the water lines and the reservoir.
- Replace the sensor: If the above steps fail, it could indicate a malfunctioning sensor. In this case, contact Keurig’s customer support service to see if you can get a replacement sensor or get your machine repaired.
Preventing the Keurig Express Descale Light from Staying On
Prevention is always better than cure, so it’s essential to take steps to prevent mineral buildup from forming in the first place. Here are some simple tips to prevent the Keurig Express descale light from staying on:
- Use bottled or filtered water: Using bottled or filtered water can prevent mineral buildup in the machine, which is common when using tap water.
- Descale regularly: Regular descaling (per the user manual instructions) is necessary to prevent mineral buildup from becoming a problem.
- Clean the machine regularly: Giving your machine deep clean at least once a week will ensure that it’s running correctly and reduce the risk of mineral accumulation.
Conclusion
If the Keurig Express descale light stays on, it can be frustrating, but it is not an insurmountable problem. Try the above fixes and prevention tips to keep your machine running smoothly. However, if it persists, it may require opening the machine or sending it to a professional. Therefore, it’s crucial to take care of your machine to ensure it continues to operate efficiently in the future!
