HP Envy 5055 Setup(Guide)
To properly unbox and begin the printer setup process, follow the instructions. Remove all tapes and wrapping materials from the inside and outside of the printer carefully to prevent internal or external damage. Don’t forget to treat the printer parts with extra care to avoid potential malfunctions. Following that, you would double-check to see if any packaging content remained.
Methods for HP Envy 5055 Wireless Setup
- Remove the HP Envy 5055 printer from the box and discard all tape, stickers and packing materials from the printer. Discard the sticker from the control panel.
- Hold the handles on either side of the HP Envy 5055 Setup and lift the cartridge access door. Remove all tape and packing material from inside the Envy 5055 printer.
- Close the access door and open the input tray door. Pull the tray toward you and remove the packing tape. Push the input tray forward until it places properly to close the input tray door.
- Connect the HP Envy 5055 Setup to a wall outlet, switch on the printer and set your preferences. To set the preferences on the printer’s control panel, choose your preferred language and country/region.
- Click on the Yes option to confirm your choice and if prompted, select the date and time and click on the Yes option to confirm your choice.
- Use the ink cartridges that came in the box with your Envy printer. Lift the ink cartridge access door until it locks into place and wait until the carriage halts.
- Remove one of the ink cartridges and discard the plastic tape from the ink cartridge. Remember to not touch the copper-coloured contacts or the ink nozzles.
- With the nozzles facing the printer, insert the ink cartridge into its slot until it clicks into place. Place the colour ink cartridge on the left slot and the black ink cartridge on the right.
- Close the lid on the ink cartridge slot and close the ink cartridge access door. Insert plain U.S. letter paper in the input tray, open the input tray door and pull it toward you to extend the input tray.
- Slide the paper guides such that it fits the edges of the paper. Mount the paper in portrait orientation and make sure you do not load more than 250 sheets.
- Do not push the guides in so tightly that they damage the paper. Push the input tray into the Envy 5055 printer and click Done on the printer’s control panel.
- Align the ink cartridges to achieve the best print quality. Raise the scanner lid and place the alignment page with the print side down on the scanner glass. Close the scanner lid and click OK. Install the software for the printer.
How to Download HP 5055 Printer Driver and install?
The connection between HP Envy 5055 printer and the device is allowed by a compatible driver. To download the driver for your Windows or Mac device, follow the instructions below. Otherwise, go to HP Envy 5055 All-in-One Printer Downloads to get the driver and manual for a specific version of your operating system.
How to Download Envy 5055 Printer Driver for Windows?
- Read the prompts in HP Envy 5055 Printer manual to clarify any doubts or clarifications. Connect the Envy 5055 printer to the network router over a wireless network.
- To connect the printer to the wireless network, enter the password when prompted. When using a USB cable, go to the Start menu, click Devices and Printers and select Add a printer.
- Your Windows 8 PC might automatically scan for both local and network printers. Select the wireless HP Envy 5055 Printer from the list, click on Next and download and install HP Envy 5055 driver.
- To download the driver using the installation CD that came with the Envy printer, check if the disc has a supportive HP Envy 5055 Driver, especially if the PC had been upgraded already.
- Download the full-feature driver from this website to access the complete printer functionality if you do not have the CD. Select the Open, Save or Download option to save the driver file on the PC for setup 5055.
- Once the download process completes, access the driver file from your PC. Open the downloads folder on your Windows PC, locate the file where the driver downloaded and double-click on the file.
- Agree to the terms and conditions and follow the prompts on the screen to complete the installation.
How to Download Envy 5055 Printer Driver for Mac?
- Refer to the HP Envy 5055 instructions in the printer manual. Connect your HP 5055 printer to the network router over a wireless network.
- To connect the HP Envy 5055 Printer to the wireless network, type the password when a prompt displays. To connect the printer to the PC using USB, select the Start menu, click Devices and Printers –> Add a printer.
- To download the driver using the software CD that came with the Envy printer, check if the disc has a supportive HP Envy 5055 Driver, especially if the PC had been upgraded already.
- Download the full-feature driver from our website if you do not have the CD. This allows accessing the complete printer functionality. Select the Open, Save or Download option to save the driver file on the PC for HP Setup Envy 5055.
- Once the download completes, access the driver file from the computer. Go to the Downloads folder on your Windows PC, locate the file where the driver downloaded and double-click on the file.
- Accept the terms and conditions and follow the on-screen guidelines to complete the installation. To add the Envy printer to the printers list, select System Preferences from the Apple menu.
- Double-click on Print & Scan and in the Print & Scan window, click on the plus sign button.
Source URL: HP Envy 5055 Setup