How to Make Shroom Bros as Fierce as RuPaul
Start by finding new logs. The time from when your mushroom is reduced for injection should not be more than 1 month. If you allow them to stay too long, there is a risk that some species of fungi will start to fill the logs.
This is deep mushroom that a small space will be left under your plug when you place it on the log, which provides a good place for the mycelium to start growing. Place a piece of tape on your drill bit at 1 inch mark so you know shroom bros how deep you need it without always measuring.
The company that
Sells spawn plugs can tell you what kind of drill bit you will need to use. Usually the 5 / 16th drill bit is in good condition. Once your first row of holes is complete, you want to place your next holes in the dry line. Start your next row of holes about 2.5 cm (6 cm) from your first row of holes, and then move the line to create a triangular pattern or test board.
3. Installing Spawn Plug
Your breeding plug should be easy to start in the hole. To install them fully, all you need to do is touch them gently with a hammer.
Your plugs should be under the mushroom of the bark and hit with real log wood. That way you will be able to cover the hole at the top with wax. If you are using sawdust spawn instead of plugs, you will need a special spring-mushroom immunization tool that puts the spawn in the holes you have dug.
- This is an important
- Step Do not skip and
- Think that your mycelium
- Will be safely exposed!
The first mushroom you will need is wax. Cheese wax is very common to close holes, but you can also use other types of wax such as candle or beeswax. You will also need a way to heat your wax and melt it. You can use a frying pan, a deep old stove, or use an old pot on a propane stove.
Once your wax has melted, you will want to use a wax dauber to apply the wax to your holes. They are not mushroom to buy, or you can try to make them with a cotton ball or cloth, or use a small brush.
If you do it quickly
You can use even a small syringe to apply hot wax.
Cover all your plugs with adhesive wax to seal them completely. This will prevent shroom bros of the mold or other mold, as well as protection from insects and other insects and keeping moisture inside. Some people even mushroom closing both ends of your log to increase the amount of moisture it retains, but that might be an exaggeration.
Alternatively another popular method of storing logs is to rotate your logs, put two on one side, and two perpendicular, mushroom back and forth to build a log tower.
The main thing you want to keep your logs in good air circulation but also a good level of humidity. You can cover your logs with a shade cloth if you like, just to mushroom yourself a little from the sunlight.
