How to Install the ActiClean Self-Cleaning Toilet
Installation of self cleaning toilets are often required in multiple locations. These include the kitchen/dining area, washroom, hallway, washroom near the bedrooms, bathroom and sometimes the living room. The reason is quite simple; filthy surroundings can easily trigger the need for frequent cleanings. In fact, some of us may be more sensitive towards such issues and would like to do something about it so that we can keep ourselves away from such trouble.
Self cleaning toilet installations have become more popular in recent times. Many people install such toilets inside their homes for various reasons. They are cheaper and easy to use than the traditional ones. Most of them are simple but still require some maintenance and upkeep. When you hire a plumber to install such toilets, remember to ask him about the plumbing stuff and other related stuff and he would surely guide you to make the right choice.
Some homeowners also hire self cleaning toilets in order to enhance their decor. For example, bathrooms featuring a vintage design can be enhanced with an old world toilet seat. This will certainly add to the elegance of the room.
The first thing to do when installing this type of toilet is to make sure that there is adequate space available for it. The area should be at least 18 inches wide to be able to fit the whole toilet properly. You may want to buy two or more toilet seats if you think there is going to be more people using the restroom at one time. The size of the toilet also has to be taken into consideration. Make sure that the size is proportional to the space available and that it doesn’t take too much space.
Things to do when installing self cleaning toilets
A drain hole may also have to be drilled and some additional holes may have to be put in after the proper installation. Remember not to try installing the toilet on cement surfaces. It may take a bit more time and effort but the results will definitely be worth it. Once the drain hole has been dug, the hole may need to be filled with cement. Make sure that the floor is level and that the height of the toilet is also proper.
The first thing to do when installing self cleaning toilets is to line the drain hole. Use a layer of self cleaning cement that is as wide as the gap that is left between the floor and the toilet bowl. To add an extra layer of security, you may line the hole with a wooden or plastic dowel. The height of the dowel should be proportionate to the height of the toilet bowl. It has to be tight so that the sealant adheres properly to the interior of the toilet bowl.
Installation of self cleaning toilets will only be successful if you follow the directions carefully. The manual that comes with it will list all the things that you need to do. It is important that you follow the same instructions to prevent damage to the fittings and the walls. If you have decided to go in for self cleaning toilets, then you must be aware of the different types of septic tanks. Before you install the septic tank, you should discuss with the plumber about the type of tank that will work best for your home.
Check leakage
When the installation is complete, you can flush the toilet to see whether there is any leakage. If there is, then it is likely that the self cleaning toilet has not worked properly. If the toilet works properly after flushing, then you can be satisfied that the self cleaning toilet has done its job. It is advisable that you flush the toilet a number of times to make sure that all the parts are cleaned properly.
