How to Install Metal Pocket Doors
Before you install metal pocket doors, you need to repair the wall on which the door will be mounted. In order to do this, you need to use construction adhesive and 1″ drywall screws. Make sure to use short screws to avoid interference with the door operation. Next, you need to install adjustable door guides, which help the door slide smoothly into the opening. Once the guides are installed, you must install the door casing and add a full-width strike jamb on the opposite side of the studs.
A dirty pocket door can scratch easily, but you must prevent this from happening by ensuring it is free of dirt. Use a feather duster or soft cloth to wipe it down regularly. The pocket door track is where dirt tends to gather, so be sure to wipe it down thoroughly. This will prevent scratching. Cleaning it regularly will improve the appearance of your door and ensure it operates smoothly. Alternatively, you can contact a professional to help you clean it.
After determining the size of your pocket door, choose the appropriate size of the frame. If your door is smaller than the frame, you should choose a frame kit in the next larger size. If you are installing two pocket doors, you may need to use a bypass door kit. Once the frame kit is installed, install the metal pocket door.
Metal pocket doors are a great way to add a modern touch to a home or business. They can help divide rooms, close off an ensuite, and are customizable. Handmade in Utah, these doors are made with the finest materials in the industry. When purchasing one of these doors, make sure to consider the quality of the frame.
Metal pocket doors are a space-saving alternative to traditional hinged doors. They’re perfect for bathrooms, utility rooms, downstairs toilets, walk-in wardrobes, and any other room that requires more storage space. If you have a large opening, a sliding metal pocket door is the ideal choice.
A few simple steps will keep your metal pocket doors in good condition. First, you need to properly install your doors so that the trim around the door is not scratched. Next, you need to lubricate the rollers on the door. This will prevent the door from getting caught and causing a scratch.
Lastly, make sure to determine the size of the opening. The height and width of the pocket door must be large enough for the opening. Standard sliding pocket doors are 30″ or 36″ wide, and 80″ tall. However, you can have custom measurements if you prefer. You can also get a single-leaf pocket door with a height of 80″ up to 120″.
0
