How does an Aircon work properly?

Byairconpros
  • Absorbing the Heat From Your Home

                  Basically, when the coolant is cool, it is eighty percent liquid and twenty percent gas, but it is completely converted to gas when your aircon heats up. The aircon service unit takes advantage of physics and plays on this transformation to either absorb or expel heat from the liquid.

  • Raising the Temperature

                  The temperature is raised when it is forced through the compressor. This makes to decreases the gas’s volume and prepares it to condense. When it passes through the aircon installation tubes where the warm air from the house is blown across the tubes, it absorbs the heat.

  • Transfering the Heat Outdoors

                   Once the coolant is able to vapor gas state, it reaches the outdoor condenser. The heat outside the aircon chemical wash actually absorbs the heat in the coolant, which lowers its temperature and pushes it back to its eighty percent liquid and twenty percent of the gas state.

  • Repeating the Whole Process

                   Now that the coolant is in its liquid state, it is once again capable of absorption of heat. It obviously would not work well if it absorbed the heat from outdoors, which is why aircon repair is immediately push back inside, where the process repeats once again.