How do I Setup my Zebra Printer?
Effective Way to Setup Your Zebra Printer
You can install your Zebra printer by following the procedure given below-
Methods 1.
- Initially, avoid connecting your printer to the computer.
- Download the Zebra Setup Utilities for Windows.
- Then install the Zebra Setup utility application by clicking through all the steps with the standard setup.
Methods 2.
- Choose your printer and click Configure Printer Settings.
- Installing Zebra printer.
- All Zebra setup utilities are now installed; Therefore, you can install and configure Zebra printers.
Methods 3.
- Configure the Label Size and Orientation in the Label Parameters window.
- Units that can be configured here are -cm, mm, inches.
- The width allowed is – The width of the label using the Units selected above.
- Please make a note about it.
- An error occurs if you exceed the maximum characters allowed by the printer model you are configuring.
- Height – The length of the label the user is using.
- For ZPL printer non-continuous media, the length of the gap, notch, hole, or black mark is set internally when the printer requires calibration.
- Use of Continuous Media may use this value, but the label length includes in the format.
- Orientation – Labels usually print bottom first but can be reversed to be on top first.
Methods 4.
- Now connect your Zebra printer to the computer and launch the printer.
- Kindly wait until Windows recognizes this printer. This happens on its own. You can identify the printer in the display corner devices and printers in your configuration screen of Windows.
Methods 5.
- Click now on Finish in Zebra Setup Utilities.
Methods 6.
- You can now see Windows automatically install the printer. If you have multiple Zebra printers installed, you find them all in this window.
Methods 7.
- Calibrating Zebra printer.
- It is required to calibrate the printer after configuration. The printer learns how the paper is put into the printing tray and where a label starts and finishes.
Therefore this is how Zebra Printer Setup is done. If you have issues, feel free to contact an expert at Zebra.
