Here’s What Can Go Wrong With Your Car’s Radiator?

Byemilyharper1

What word should define “radiator”? Of course! The defender! It perfectly defends the engine from heat so that it can work properly. A radiator, however, frequently goes unnoticed until a problem manifests. When a problem makes its job difficult, it shouts loudly.

There is a mechanism under the hood to manage excessive heat. It involves a radiator, thermostat, and pump to complete a cooling system. The fluid that circulates around the engine block to disperse heat requires a radiator to release the heat, which prevents overheating. When smoke is coming from the radiator, the radiator has failed to perform as intended, which has led to the vehicle overheating.

So it is necessary to learn about the potential issues with radiator. And, of course, prevent them before they become hazards.

Leaks make radiator less efficient

Leaks happen where there are hoses and liquid to circulate in them. However, a radiator can have a leak too.

As coolant starts to circulate from the radiator to the heated running engine and it absorbs heat before returning back to the radiator through same hoses. Therefore, hoses that carry the heated coolant are always under immense pressure and are prone to wear and tear.

Once one or more hoses sustain some sort of damage, there will always be a way for leakage. And, when leakage happens, the coolant goes short, and cooling of the heated engine is hampered. This leads to a car’s engine overheating. In case you own a Renault car and left wondering ‘where is the best renault garage near me?’ Look no further than Service My Car to get the best engine repair for your Renault car in the town.

When there is a coolant leak, you find green fluid under your vehicle. It smells kind of sweat. Sometimes, especially in the case of old cars, a radiator might leak due to a rusted body.

However, you can take preventive steps by availing yourself of an inspection of the entire cooling system and even the replacement of hoses during routine car maintenance. You can approach Service My Car for an expert’s assessment and an instant solution.

Rust does not behave well with radiators

Rust appears on the metal while paint fights against it. Have you ever seen rust appearing on a scratched metal sheet (one that has lost its paint cover)? In the case of cars, it is quite visible on the outer surfaces, but what about the metal components inside the vehicle?

When air, metal, and liquids meet, oxidation occurs, as does rust. All those ingredients are present in your radiator, which means rust is a real threat. If your radiator gets too rusted, it can end up with congestion or otherwise malfunction.

In case your car is showing severe signs of consistently running hot, it could have a rusted radiator. However, it is hard to find rust that appears inside the radiator. But, a brown-colour coolant is a definite sign of rust appearance. These types of incidents are most common in cold weather.

Blockage due to unnecessary deposit

The radiator requires a constant flow of coolant, but there would be blockage due to mineral deposits. Apart from mineral deposits, there could be other things that can block radiator.

This makes the radiator work harder to maintain flow, and most of the time, it fails to provide enough coolant to the engine. There would be heat all around. If there is no rust and any instance of leakage, just check for the mineral deposit.

However, a coolant flush might work to clean any deposit inside, including rust. Just visit your nearest Service My Car shop for a thorough inspection.

Clogged radiator fins do not allow the coolant to pass through

Everything is essential in a cooling system, even thin metal pipes or fins. They fit at the front of the car. The hot coolant is pushed into these fins so that cool air can pass through them and dissipate heat from the coolant.

This is the place where heat gets released from the coolant. Therefore, if these fins get clogged, there would be no space for air to circulate, and eventually there would be inefficient heat release.

A malfunctioning thermostat or failed water pump halts radiator functionality

A radiator needs the thermostat and water pump to get an engine cooled down. So there would be a correlated performance of the entire system to get things work. When the thermostat does not work properly, there is an improper supply of coolant to the radiator. Similarly, a failed water pump cannot pump the coolant into the system. In both conditions, there would be less cooling or a lack of cooling under the hood, and it would definitely get heated in no time. A radiator is not going to work with a malfunctioning thermostat or defective pump.

Can you expect your car to run without the engine? Of course not, so the engine also needs a radiator to remain cool. Any problem would definitely hurt the engine and other components under the hood.

Service My Car helps you keep your vehicle working in excellent condition, enabling prompt solutions for a number of problems. Do not delay your visit to one of the nearest workshops of Service My Car.

Or just book car service or order a car repair quote on our website or app.

5 Top Reasons to Schedule a Chimney Inspection Worcester MA

Starting away in front of a roaring fire is one of the most accessible and most satisfying pastimes during cold weather. However, there is nothing pleasant about the fire, smoke, and water damage that can occur if your fireplace is not kept clean. Having your chimney, fireplace, or wood-burning stove inspected by a Chimney Sweep certified by the Chimney Safety Institute of Worcester MA can help prevent serious problems and keep your venting system running efficiently. can assist To that end, three types of chimney inspections are available:

How much does a chimney inspection in Worcester MA cost

level 1 chimney inspection ($75 to $250) consists of a visual inspection of the fireplace or wood-burning stove and chimney. Choose this option if you intend to use your fireplace/wood-burning stove as you have in the past. If there have been no changes to the fuel type or the shape/material of the flu (i.e., the space inside the chimney) in the year since your last chimney inspection. There has been no damage to the chimney structure.

level 2 chimney inspection ($100 to $500) includes online scanning of internal chimney surfaces. This is the best option if you've made any changes to the chimney or fireplace since the last inspection. Such as changing the fuel type or the shape or material of the flu (i.e., the space inside the chimney). If there was a malfunction that may have damaged the chimney (e.g., a fire or earthquake). If you're planning to sell your home soon.

level 3 chimney inspection ($1,000 to $5,000) inspection includes a Level 1 and Level 2 inspection, as well as a partial tear-out of the chimney to look for more severe damage. If a Level 1 or Level 2 inspection reveals potential safety hazards or hidden problems in the chimney, technicians will perform this inspection.

Parts that are not visible to the naked eye may be damaged.
Repairing or replacing damaged chimney components on time can reduce the risk of fires, carbon monoxide exposure, and water damage. Unfortunately, many vital parts of the chimney are hidden or too high for homeowners to inspect. A chimney sweep is equipped and trained to evaluate damage to the following critical chimney components:

Crown: A crown is a downward-sloping concrete, stone, or metal overhang at the top of a chimney that directs water away from the exterior of the chimney to prevent erosion. Rainwater can run down the sides of the chimney and erode it if it is cracked, usually as a result of weather exposure or the use of weak construction materials, compromising its structural integrity over time. Rainwater can also enter the flu and deteriorate the flue liner (see below). To prevent water damage to the chimney and flue, an inspector can repair or replace a cracked crown.

The flue liner—a clay, ceramic, or metal conduit located between the flue and the chimney walls—protects the chimney walls from heat and corrosion. When combustion byproducts are directed out through the flue. It also prevents smoke and harmful vapors such as carbon monoxide from entering your home through potential cracks in chimney masonry. High heat or embers can damage chimney walls or touch surrounding combustible materials of the home and spark a chimney fire. When cracks form in the flue due to excessive heat, water damage, or wear and tear. Smoke and vapors can also enter the home through masonry cracks, potentially exposing you to carbon monoxide. An inspector can quickly detect and repair cracks in the flue liner. Our Chimney Inspection Worcester MA and surrounding areas. We perform all services related to chimney cleaning & maintenance. Call us at 508-960-7546.