Garage Door Repair – 5 Easy Items to Examine

Garage door repair may often be done by the homeowner themselves. You will find at the least 5 simple things to check on, before calling a professional Garage Door Repair. Some repairs are really easy. Like, a stiff or perhaps a squeaky door will merely demand a good cleaning and lubrication. Other repairs, such as for instance repairing a torsion spring, are really dangerous and require help from a professional.

Before proceeding to the repair, be sure to unplug your garage door opener, to ensure that you don’t get a power shock when you are repairing your garage door. You will most likely be standing on a ladder, which is a very bad place to have a power shock, since you may even fall off the ladder. Also, remember to wear safety glasses whenever using power tools.

Here is a set of things to check on before calling for an expert for the garage door repair:

1. Check the Metal Tracks for Damages

This easy garage door repair tip may often solve the problem very fast. The metal tracks often could have dents or bumps. If you learn any such damages, strike the damaged the main track with a wood block and a hammer to straighten the track.

2. Check the Alignment of the Tracks

If the tracks are not aligned well, they might be causing the entranceway not to work. It’s not always essential to unscrew the tracks; you are able to just make an effort to loosen the bolts or screws and to tap the tracks slightly into position. Use a level to check on the alignment of the tracks. Aligned tracks enables you to be completed with your garage door repair in no time.

3. Clean and Dry the Tracks

Even though it may seem obvious, but hardened dirt and old lubricant could be the reason for the garage door sticking. In cases like this, your garage door repair may contain merely cleaning the tracks and then drying them. You can use regular cleaners to wash the tracks.

4. Lubricate the Tracks and the Rollers

Merely lubricating both, the tracks and the rollers, can fix the problem and conclude your garage door repair in no time. For lubrication, you might make use of a lubricant spray or a silicon spray. It is probably simpler to lubricate the tracks after cleaning them. Actually, any movable part will benefit from lubrication.

5. Tightening the Loose Bolts and Screws

Bolts and screws tend to become loose with time. Try to check on all the screws and bolts mixed up in opening/closing mechanism of one’s door. Sometimes, merely tightening them may solve the whole problem. If you cannot tighten the screws, because the holes themselves have grown to be loose, then you can use a “wood filler” or pieces of normal wood to fill the holes.

What To not Do?

If you have tried each one of the above mentioned solutions, and do not require have worked, the problem could be the door spring. However, it is preferred not to execute your garage door repair if the problem is apparently the spring, especially when it’s a torsion spring. Unfortunately, there has been numerous cases, where individuals have gotten injured or even killed by the garage door springs. One of the very common injuries is a winner in the pinnacle, leading to serious trauma to the brain.

If you have doubts your garage repair, certainly not in case you attempt it. It generally won’t cost too much. However, an expert could save you from any injuries.