Freemax Mesh Vape Coils: Triple Mesh for Better Experience
The popular Fireluke Mesh, the original sub-ohm mesh tank, has been followed by the Freemax Mesh Pro sub-ohm tank. The Fireluke Mesh series continues where it left off, and the Mesh Pro, which is based on the first Fireluke Pro, is set to gain even more popularity. This tank features four new coils, including what are said to be the first multi-network heads for sub-ohm tanks. The kit comes with a single mesh with an impedance of 0.15 ohms and a double mesh with an impedance of 0.2 ohms. There are also 0.12-ohm and triple 0.15-ohm SS316L coil heads for wattage or TC vaping. Want to know more about this coil? Keep reading.
Why choose Freemax Mesh Pro Coils?
Mesh coils have completely changed the vaping business in just a few years. Mains coils are now usually part of the standard equipment of almost every modern tank system etc. Mesh coils are now available for most older tanks. Since grid coils are so widely used, there is a good chance that a manufacturer no longer makes coils for a particular tank if grid coils are not readily available. But the ubiquity of mesh coils had to start somewhere, and that “somewhere” is Freemax. In early 2018, Freemax introduced the Fireluke Mesh tank.
It was widely popular because it was the first vape tank created exclusively for mains coils. Everything fantastic about Fireluke Mesh has been enhanced with Freemax Mesh Pro. Dual, triple, quad, and quintuple mesh coil atomizers were introduced in this tank for the first time. In other words, it produced the biggest and tastiest vape clouds anyone had ever encountered. Many people claim that the Freemax Mesh Pro coil is not the best vape coil currently available.
How to replace Freemax Mesh Pro Coil?
The coil can occasionally have trouble making solid contact with the plate at the base of the tank, which is the only downside to the Freemax Mesh Pro tank. If you don’t replace your coils carefully, you may find yourself in a position where your vape device won’t recognize the coil after you’ve built and filled your tank. You want to take every precaution to prevent this, as fixing the problem would require disassembling the tank, which will result in the loss of your e-liquid.
Wait until the tank is empty before completely disassembling it to replace the Freemax Mesh Pro coil. After removing the tank, remove the coil and set it aside for cleaning. To get rid of any e-liquid residue, thoroughly rinse the glass and metal parts of the tank. Then dry the parts with a paper towel. Lightly prime your Freemax Mesh Pro coils before installation. Despite the huge circumference of the coil, the actual heating surfaces are quite modest, as you can see when looking at it from above.
Apart from the mesh strips, the entire remaining space inside the spool is taken up by the combination of cotton and tea fiber that Freemax uses. There are a lot of absorbent materials. Place a small amount of e-liquid on each of the side holes of the coil wick to fill the Freemax Mesh Pro coil, then drip more e-liquid over the top of the coil to directly wet the mesh strips. Once the e-liquid has had a chance to absorb, check the wick holes one more time. If the cotton seems dry, add a little more e-liquid.
What is the right way to clean Freemax Mesh Coil?
If you regularly clean and reuse your vape coils, you must have noticed that the Freemax Mesh Pro coils make cleaning the coils by hand more difficult than it was with previous coils. This is because although the web strips are relatively thin, the coils are incredibly wide. A dense wick of cotton and tea fibers fills the remaining space in the coil. Every time you vape, the Freemax Mesh Pro coil creates a substantial and pleasant cloud of vapor as it can hold a lot of e-liquid. However, the coil is difficult to clean by hand due to the dense wick.
Your Freemax Mesh Pro coils will probably not be completely clean when you remove them from hot water if you try to clean them by simply soaking them in it. As a result, the ROBO2020 automatic vape coil cleaner is an excellent choice. In just 30 minutes, the ROBO2020 can clean and dry your dirty Freemax Mesh Pro coils using heat, water and gentle vibrations. Mesh coils might be an expensive affair instead using the ROBO2020 will allow you to get new coil flavor every time.
How well does this coil perform?
Coils are mostly responsible for the performance of the atomizer (or sub-ohm tank). At the specified wattages, all Mesh Pro coils can produce excellent vapor and clean flavor. But the star of the show is the triple net spool! The tecting revealed that none of the other coils, not even the double mesh coil, had that wow effect. No matter the power or airflow settings, the flavor was never really alive. Those coils give me a clean taste, but not much. Aside from the triple sieve, none of them have particularly good flavor density, even when used above their recommended range.
To end
You can feel good about your decision if you own a Freemax Mesh Pro or the newer Mesh Pro 2. You probably won’t find a better tank than the Mesh Pro until Freemax or another vape manufacturer develops new technology that will change vaping again.
