Easy Hacks to Troubleshoot Epson Printer Error

Epson is the brand that has earned fame and a spot on the market due to the high-quality printers it makes. However, the Epson printers aren’t without technical faults. Certain Epson printer users frequently encounter errors like E-01 and Epson printer error code 0x97. Epson errors with printers E-01 are identified in the Epson manual as a fatal error, which indicates an issue of a serious nature. The error indicates that the printer cannot run the self-test procedure. When the printer users attempt to turn the printer on, it will begin to test all frameworks but fails to complete the printed job as instructed. If you’re in the same position and you are not sure what to do, there’s nothing to be concerned about. There are many ways to fix this issue. In this article, we’re going to offer the most simple solutions that can quickly fix the issue.

Learn the causes of Epson printer error code E-01.

After a long period of time, the printer is unable to perform at a proper function quality. This error message indicates that the application is not functioning correctly. The printer’s use that is not necessary can reduce productivity as well. If you frequently encounter the error code E-01 prior to attempting the correct parts, it’s important to understand the reason for this error. Take a look at the reasons.

Sometimes, the location of the CD plate is not fixed. This causes the error code E-01. An issue with the cable line could cause the power supply to be cut off. This could result in the deactivation of the self-starting system. Sometimes, the lock for transportation of the printer suffers damage. Inability to maintain the lock properly increases the likelihood of encountering the error E-01. The driver of the printer may be out of date and affect its performance. If you’ve installed CISS in your printer, it could stop the carriage blocks from being able from moving. In the end, you may encounter this error.

This Epson Printer error code, E-01 can occur when the internal segments are weak and fail to function correctly. This error code is difficult to fix and can require you to search for a solution. So, you must read the information in the next section to find effective solutions to this error.

Tips and tricks to fix Epson Error Code E-01 on Printers

Check the steps below to determine whether it will fix your issue.

Verify the Power Supply

If you encounter Error Code E-01 the first step is to ensure that you should unplug the power. To do this, disconnect the power cable for the printer from the power source. After that, switch off your Epson printer for 3 to 5 mins. Then, switch it back on. Then, you have to verify that you have removed the power cord. If you switch off the machine, you need to verify the process of initialization for each printer unit. Then, you must check that the power supply from the source of power is in good condition and that the cables aren’t stuck between them. Cables that are caught can cause significant issues and also reduce productivity.

Working in conjunction with CISS:

If you’re using the CISS conditions for this Epson printer, it’s recommended to verify that it’s functioning properly. The scanner component of the printer has to be shut down in a proper manner. A routine for initialization will begin doing the “Start-Up Checks” and the entire device will begin to function normally. When using CISS, if ink cartridges do not shift from left to right side, it is possible to encounter this error. Therefore, it is essential to make sure you use authentic Epson cartridges that contain ink.

The System should be run in Safe Mode:

Safe mode is a feature that allows the printer to reboot using its normal operation. It is recommended to use your computer in Safe Mode. Examine whether your printer is not displaying this error message. If it’s not, then you have to test your connection to the internet. If your printer is running in the wireless mode that allows AirPrint, then you need to check it thoroughly. So, you should have an internet connection that is reliable to avoid E-01, the Epson Error Code E-01 on the printer.

Disassembling the Printer

Reach the loading section within the cartridge even if it’s not in a functioning state. Move the carriage, and then check if there is any paper stuck in the sensors of progressive. This could be the cause of the issue with the tray for paper. Open every area of your printer and clean the visible sensor as well as those for feeding paper. Keep the encoder band and the dust from the plate encoder.

Make sure you check the CD Plate and The Scanner Portion

If the CD’s plate is in the eject position Then you must ensure that you are capable of pushing the CD tray switch back to the storage area. Make sure not to touch any other element of the printer, other than the tray. Shut off your printer to ensure that the paper isn’t stuck within the printer. Also, you must confirm that the upper part of the scanner in the Epson printer is shut properly. In the guideline above we’ve provided ways to resolve the Epson Printer Error Code E-01 in detail. We wish you the best of luck to complete all the steps above to get rid of this error within a brief amount of time.