Concrete Sealers in Sydney: Why Are They Necessary and How Do They Work?

If you’ve done any concrete research, you’ve probably discovered that professionals recommend utilising outdoor concrete sealers. Now you want to know if a sealer is truly beneficial or if it is something that professional pool builders and installers recommend to consumers to make more money.

Outdoor concrete sealers or shower sealers in Sydney are not only helpful but also essential. Experts that advocate sealing a concrete surface are doing their clients a huge favour. Without this extra layer of protection, concrete will absorb moisture and, among other things, fracture, spall, flake, and discolour. In fact, an unsealed concrete surface is more likely to break prematurely.

Some more reasons to Get Concrete Sealer or Waterproof Shower Sealer in Sydney

Remember that outside concrete is exposed to harsh elements such as wind, rain, snow, dirt, pool chlorine, seawater (if you live near the coast), and more. A high-quality concrete sealer or waterproof shower sealer in Sydney from Megatreat Liquid Stone is vital whether you have ornamental concrete poured on a pool deck, patio floor, outside patio worktops, walkway, driveway, or any other surface. Following the initial application of a concrete sealer sealer in Sydney, an expert will need to reapply it every few years for continuing protection.

Technologically enhanced sealers protect the efficacy and strength of outdoor-installed concrete. If properly sealed, outdoor concrete has the potential to be one of the most durable materials associated with your home. Outdoor waterproof shower sealers, particularly when applied to pool decks, significantly reduce the danger of water and chemical damage.

How Does Concrete Sealer Sydney Work?

You may have heard of concrete sealing if you have concrete driveways, patios, or walkways around your home, but you may be wondering how concrete sealer works. While most clients who contact or visit us do have knowledge of the process, we always walk them through how it works and how we use it, so that everyone is on the same page.

Our Sealing Process:

We always make sure that the consumer understands what is involved before beginning any sealing operation. We only use the best concrete sealer in Sydney, so we want to ensure that the end product satisfies all requirements. With this in mind, here is our step-by-step procedure for installing concrete patio flooring, concrete paths, and concrete driveways:

Pressure Cleaning:

We must first guarantee that the concrete surface is as clean as possible before applying our high-quality sealer. This entails going over every inch of the concrete surface with one of our cutting-edge pressure cleaning devices. This will remove discolouration, debris, and accumulated dirt and grime. Essentially, we’re removing all of the debris and discolouration that have accumulated on the surface of the concrete over time in order to apply our final sealant layer to a clean surface. The last thing we want is dirt trapped behind the sealant!

Drying:

We let the concrete surface cure for at least 24 hours after we are satisfied that the entire surface has been cleaned. But since concrete is a porous material, it will absorb some of the water used to clean it. Before applying the final sealant coat, the concrete must be allowed to dry for at least 24 hours. Sealing it too quickly may result in moisture being trapped behind the final layer, causing cloudiness or milkiness of the sealant. While some operators may rush in, we like to take our time and do a far better job!

Seal:

We apply the final sealant layer once we are satisfied that the concrete surface is sufficiently dry and clean as we can get it utilising one of our special pressure washing units and rotary attachments. This is the quickest phase, but it is also the most important. When the sealant is totally dry and suitable to walk on, your driveway, footpath, patio, or other concrete areas will appear brand new!

Check Out Your Brand Your Brand New Concrete Surface

Many of our customers have told us that after using our sealers, their driveway or other concrete area looks brand new! Our sealer is not only long-lasting, but it also protects against oil, rain, dirt, and other impurities.

Whenever we explain how our concrete sealer in Sydney works to our customers, they are typically amazed at how simple the process is. They usually discover that a significant amount of value has been added to the home for a relatively small cost. This is a success in our book!