Choosing the Right Electrical Conduits for Your Home or Office
Electricity is a need in today’s life. Electricity must reach every imaginable corner when planning any building, whether it is a shop, a factory, a home, an office, or any other commercial structure. An electric cable is installed to ensure that electricity is available at the point of service. Because these electric wires cannot go across the building, conduits are created through which they are channelled to the point of service. These conduits can be put either on the surface of the wall or within the walls. Conduit’s secondary tasks include maintaining the building’s aesthetics, holding the electric wire in place, and protecting the wires from external hazards such as mechanical and thermal stress. The size and weight of the electric wire affect the conduit size and type that is required.
Aside from the cable’s size, the sort of electrical conduit that needs to be constructed is determined by the course and environment through which these electric wire cables may have to be routed. Electrical conduit fittings come in a variety of shapes and sizes to suit a variety of applications.
Types of Electrical Conduits
Electrical conduits come in a variety of materials, including metal, aluminium, PVC, and steel, and can be rigid or flexible. Flexible conduits may be preferred if the electrical wire cable is flexible and must be routed around multiple turns. Armoured cable conduit, or EMT pipe, is the most frequently utilized electrical conduit in residential applications. An armoured cable conduit is nothing more than a coiled metal covering with the primary function of protecting the wire from any potential nail puncture.
EMT Conduit Connectors:
Whatever you plan to build, you’ll need connectors if you want to avoid welding and build a structure with EMT. Connectors come in a variety of shapes and sizes, each of which is beneficial for a specific angle or application. Knowing how to use connectors and how they work will drastically improve your DIY game and make it much easier to draw out blueprints and select the parts you’ll need to complete your project.
PVC conduit is always a good choice, largely because of the cost and the fact that it protects against water seeping into the wall. In some cases, the electric wire may need to be run below ground or in an open area that is exposed to air, dust, and water, in which case PVC conduits are employed.
Electrical metal conduits are ideal for basement or garage applications where the wire runs over the surface of the wall. Metal conduit in a basement would provide much-needed protection from rats and mice. A conduit bender, conduit couplings, offset fittings, and elbows may be required to run these metal conduits through turns. Steel or aluminium can be used to make These electric metal conduits. Aluminium conduit would be a fantastic choice for commercial or industrial applications when the climate is humid or moist, as aluminium does not corrode.
The Liquid-tight Flexible Non-Metallic Conduit: A raceway with a circular cross-section and a smooth PVC inner surface, as well as an incorporated reinforcing part within the conduit wall, is type LFNC-B. LNFC (Liquid-tight Flexible Nonmetallic Conduit) is a flame-resistant conduit that can be used in wet, dry, or oily environments. They can be used in industrial and commercial settings, as well as indoor and outdoor settings. These are suitable for use in a pool, spa, or air conditioning and HVAC systems.
Liquid-tight flexible metal conduit: As the name implies, a flexible metal conduit that is liquid-tight is suited for applications that have a lot of moisture. Water treatment plants, paper mills, bridges, and petrochemical factories are the best candidates. A plastic waterproof coating is applied to a liquid-tight flexible metal tube.
0
