Benefits Of Stick System Curtain Wall Installation

ByNationwide Curtain Wall

Do you know what distinguishes your building from the rest of the buildings in your particular area? It’s Exterior- is the correct answer. The construction industry is at its peak these days and designers are working day and night to come up with new ideas when it comes to curtain walling. The outer covering of your building should be exciting from the inside as well as the outside. Curtain walling is such a building envelope that makes the building resistant to many harsh weather conditions. Though after the installation of curtain walls, you have to maintain them in the right manner.

One of the traditional types of curtain wall installation is stick system curtain wall installation. It was developed in the 19th century by German architect Walter Gropius. Though with the change in technology the curtain walling system has become more sophisticated than, it was in earlier times. In a stick system of curtain walling, each unit is added piece by piece on the construction site rather than a whole unit fixed on the building.

Some of the benefits of stick system curtain wall installation are listed below-

  • As each and every piece is installed on the construction site, there is full clarity regarding the type of material used.

  • In such a system any adjustments can be made on the site of construction without damaging the whole structure.

  • As the panels are attached to the construction site, there is no room for even minimal errors.

  • If you have a specified budget in your mind, then a stick system of curtain walls is the right option for you.

  • It leads to a reduction in the penetration of air and water.

  • This system is ideal for small to mid-rise buildings.

In the stick system of curtain walling, the time taken to install the units is longer because fabrication and glazing are done at the site of construction. The panels are connected unit-wise, whether horizontally or vertically as per the requirement of the building. With a stick system of curtain walling, 3D structures can be covered with a sheet of glass, making the building look unique. The elements in the stick system are fabricated within a factory and then shipped to the site and are installed by specialists. The units are held in place by pressure plates that are attached with cover caps. According to the load capacity, a required design is made and then units are manufactured in the factory.

According to the method of installation, there are 2 types of curtain walling systems. You need to choose the one according to your requirement. They not only try to achieve pressure equalization between the outside and the inside environment but make sure the interior of the building is safe from extreme weather conditions. If you are looking for a stick system curtain wall installation, then contact Nationwide Curtain Wall today and get a free quote. With their team of qualified individuals, they will clear all your queries.