How to Download Nexus Qcow2

Cisco Nexus Switched needs no introduction to the networking world. Download nexus qcow2 and it will help you to add nexus switches in eve-ng. Nexus Switches also use a few additional resources as compared to other nodes. Nexus switch is so rich in structures that it covers 80% of data centres in the world and you can create topology & practice as much as you can in Eve-ng. If you need to download Eve-ng with numerous pre-loaded images then you can install the Cisco Nexus 9k switch. The download will help you step by step to add the nexus 9k switch in eve-ng.

Cisco Nexus 9k Images in the eve-ng

The EVE Image Name has the downloaded Filename and with the Version vCPUs and ram, nxosv9k-7.0.3.I7.4, nxosv9k-7.0.3.I7.4.qcow2, nxosv9k-7.0.3.I7.4. Other versions should also be maintained following bellow’s procedure

Download all Cisco Nexus 9k Images for Eve-ng

If you have access to the Cisco software portal, so you can straight download the image from the Cisco website. If you do not have access to the Cisco site you can download the image from the alternate link.

Preparing the Eve-ng Cisco Nexus 9k switch

The Steps are based on nose-final. 7.0.3. I7.4. Qcow2 making, for another image deployment, uses good names respectively. SSH to EVE-ng & login as root, and make a temporary working directory on the EVE’s root.

Start node and on the prompt answer:

Abort Auto Provisioning & continue with the normal setup

Do you want to enforce a secure password standard if you like to enter the basic configuration dialog, you can enter. After that, you can log in to your switch first time using User Access Verification. To get the proper image term to set boot nxos from it. After that enter into global configuration mode. Enter configuration commands, all at one per line and End with CNTL/Z.

0