Know How Concrete Vibrator Machine Helps Your Construction Project
Concrete is an imminent part of any construction project and all the tall buildings or a small house is made strong and safe because of concrete. During construction, when concrete is put in place, it needs zero air bubbles and no gap in the layers. For this purpose, concrete vibrators are used. When the concrete vibrator machine takes out the gaps created due to air bubbles, the concrete reinforcement becomes stronger, giving longer life and strength to constructions.
Advantages of using a Concrete Vibrator
The concrete vibrators are great machines and some advantages of using them are listed below.
Better Strength of Construction
When these machines are used, the bubbles are removed from the freshly placed concrete. This gives better strength to the construction. The concept of pucca construction involves that the concrete should have no gaps. Once a gap is created, it can lead to earlier weathering of walls and foundations.
Time Saving
The process of making sure to remove air bubbles is tedious if done manually. This machine makes it convenient as well as quick. The precision and scope for mistakes are also much lesser as this is more skill than heavy labor.
Better Finished Product
The overall effect of using this machine is that it gives a better finish to the product. There are no cracks, which also decreases the layers of paint and putty required to cover the gaps and cracks. If they are not covered properly, it can also lead to bad finishing.
Less Cement required
When these machines are used during construction, less cement is required to make dry mixes, which saves the cost of cement without affecting the quality.
Models of Concrete Vibrators
Here are a few models of these machines which help the process of construction.
PowerHouse 35 mm Electric Concrete Vibrator 600W PHEV65
PowerHouse 35 mm Electric Concrete Vibrator 600W PHEV65 with 6 Months Warranty
Features
No Load Speed: 1300 R/ min
Frequency: 50 Hz
Model No.: PHEV65
Length: 1.5 meters
This electric vibrator for concrete is a great tool to give strength to your constructions whether for individual or commercial purposes. This machine has a reaching length of 1.5 meters, which is quite deep and is suitable for all surfaces including foundations, floors and walls. The machine has a design to last long carrying on tough tasks for years. A long cable ensures easy reachability everywhere. It has features like overheating protection and overload protection, which gives it a longer life due to protection from jamming.
Trumax Electric Concrete Vibrator 600 W Mx1166
Trumax Electric Concrete Vibrator 600 W Mx1166
Features
No Load Speed: 4000 R/ min
Frequency: 50 Hz
Model No.: MX1166
Length: 1.5 meter
Weight: 9 Kg
This electric vibrator for concrete is a powerful device with a speed of 4000 rotations per minute which is good even for large blocks of concrete. Moreover, with a length of 1.5 meters and a diameter of 35 mm, it goes deep inside without any problems. This machine is ideal for all types of construction projects. The in-handle gives a better grip and ease to operate the on/off switch. It has an output power of 600 Watts and runs on 220 V. With a weight of below 10 kg, the machine is easy-to-carry. The dimensions of the machine are 100 X 50 X 10 cm for shipping.
YURI Electric Concrete Vibrator 850 Watt
YURI Electric Concrete Vibrator 850 Watt
Features
No Load Speed: 4000 R/ min
Frequency: 50 Hz
Length: 1.5 meter
Weight: 9 Kg
This machine is light, portable, and easy to handle. It has a frequency of 50 Hz which is good for the segment. It has more than a meter length of the rod which is sufficient to penetrate most surfaces. This vibrator for concrete has n- load speed of 4000 rotations per minute which is good for all types of surfaces. A no-load speed is the rotation of the machine rod without putting it against any surface, so it does not face any resistance. This machine has a power input of 850 watts and a Voltage capacity of 230 V. The diameter of the machine nozzle is 35 mm.
SuperTech 35 mm Concrete Vibrator 650W
SuperTech 35 mm Concrete Vibrator 650W SVB 1-650
Features
No Load Speed: 4000 R/ min
Input power: 650 Watt
Diameter: 35 mm
Model No.: SVB 1-650
This machine requires an input power of 650 watts and a voltage of 220 V. It has a long cable for better reach and a good grip to handle the tough blocks of concrete. It has a rotation speed of 4000 per minute(no load) which is sufficient.
The vibrator for concrete is a great machine to be used during construction for easy, convenient, and faster concrete spreads. There are various types and brands of these machines. To choose a suitable brand with great features and quality in a hassle-free shopping experience, visit Industry Buying.
0
