About Stainless Steel 304/304L Flanges

Stainless steel 304/304L flanges are made from a variety of pipe materials, including low- and high-yield steels. Stainless Steel 304 Slip On Flanges’ primary purpose is to allow flow to the center of the system. Throughout this run, Stainless Steel 304L Threaded Flanges are being passed, and the aperture is referred to as the branch.

Stainless Steel 304/304L Flanges are used to improve the flow and direction of flow in the pipe system. The available stainless steel 304L blind flanges are widely used to protect pipe ends and keep out debris and other foreign objects. Having a water-resistant connection is the main purpose of employing these stainless steel 304 socket weld flanges.

On the water pump lines, stainless steel 304L lap joint flanges are also installed with the sole purpose of allowing air to escape through air blocks. One of the most widely used industrial pipe fittings that help to connect two pipes or tubes of different diameters is a stainless steel 304 ring joint type flange. Stainless Steel 304L Spectacle Blind Flanges’ primary function is to reduce the line’s size from a lavishly proportioned to a less significant pipe size, which unquestionably leads to improved flow pressure.

Stainless Steel 304/304L Flanges have a lot of positive qualities. For example, deep drawing quality, good toughness, ease of cleaning, ease of fabrication, very good strength, and fabric ability. Others include good welding/forming properties, oxidation, and corrosion resistance due to the presence of chromium and fabric ability.

Specification of SS Flanges

Specifications: ASTM A182 / ASME SA182
Standard: ANSI Flanges, AWWA Flanges, ASME Flanges, BS 10 Table D Flanges, Table E Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flanges.
Dimensions: ANSI/ ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.
Size :1/2″ (15 NB) to 48″ (1200NB) DN10~DN5000
Flange Face Type: Raised Face (RF), Ring Type Joint (RTJ), Large Male-Female (LMF), Flat Face (FF), Small Male-Female (SMF), Lap-Joint Face (LJF), Small Tongue, Large Tongue & Groove

Applications of SS 304/304L Flanges

Railways, the petrochemical industry, heat exchangers, specialty chemicals, the chemical industry, condensers, the pulp and paper industry, fertilizers, construction, buildings, etc. are some of the applications where it is employed.