How To Master Combine Concave Setting?
The combine harvesters are undeniably iconic machines in the agriculture sector. Not only it has transformed manual farming work into a mechanical procedure, but also it is offering immense efficiency to the farmers. The combine concave setting and its operation remain always critical for minimizing the harvesting loss. When there is poor combine component adjustment, then it will not only be resulting in a loss of yield but also there will be a reduction in the grain quality. However, upon the most appropriate combine concave setting, whether it is the cylinder or rotor one, there will not only be the preservation of the yield quality, but also the separation of the kernels from the components of the non-grain crop.
Whenever you are looking forward to mastering the setting of your combine for achieving a high-performance harvest, then here are certain tips to follow:
Always make sure that the entire crop is prepared for the harvesting process. Also, the farmer is required to carry out the testing of the moisture percentage in the grains.
The farmers are advised for setting the combine according to the recommendations of the manufacturer. This is the starting point. Later on, the settings can be adjusted according to the specific conditions of a particular crop.
The ultimate objective of the most appropriate combine concave setting is to attain an extremely smooth and even flow of the material of crops moving through the agriculture machinery. So, make sure that the combine is running nearly to the fullest for minimizing its impact on the crops.
For achieving maximum efficiency with minimum grain loss, make sure that the header is operating efficiently. Also, utilize the header of proper size and make suitable adjustments.
Carry out the operation at full throttle. All combine drives are relying upon a specific engine speed.
Make suitable adjustments to the snouts for a proper combine concave setting. This is done in such a manner that it is touching the ground and that too under normal conditions.
Also, carry out the setting of the snapping roll. It is required to be spaced as per the thickness of the stock. This has to be done at a greater width as much as possible without shelling the grains.
Check the clearance of the concave properly. This is done for avoiding the breaking of the cobs excessively. This will also be leading to the kernels that are being left on cob fragments.
Open all the sieves in such a manner that they are enough for letting the grains pass through. Carry out the setting of the sieves towards the widest recommended type.
Also, the farmer is required to carry out the checking of all the augers for wear and tear.
The most appropriate speed of the rotor, concave clear and setting of fan and sieve adjustment will be reducing the volume of tailings.
Attain Clean And Premium Grade Yield With Proper Combine Concave Setting
The ultimate goal of a proper combine concave setting is to attain a clean, premium grade, and high-end product. Also, it will be minimizing the loss of grain. Make sure to follow the recommended setting suggested by the manufacturer, and keep on checking and adjusting it frequently. Since the crop conditions keep on transforming rapidly with the change of seasons and thus, it keeps on monitoring the losses behind the combine as well as the grain quality within the tank during the day.
0
