How to Operate a Car Jack

If you’ve ever experienced a flat tyre while driving, you know that a car jack is a driver’s best friend. If you’ve been lucky to dodge this catastrophe, you may be wondering what a car jack is.

A vehicle jack is a piece of equipment used to partially lift a car off the ground, usually to remove and replace one of its tyres. Because a car jack is an essential part of the tyre changing operation, most automobiles have one, along with an additional tyre at all times.

Before we move ahead with how to operate a car jack, let’s first understand its types:

Get to Know Everything about Car Jack

Types of Car Jack

Jacking up your vehicle is not a one-size-fits-all procedure. Different jacks are required for different vehicle sizes, and some jacks are favoured simply because they are easier to use than others.

Lion 8 Patti Scissor Jack with Rod – 534

1. Scissor jack: The majority of people who have used a car jack have done so using a scissor jack, which is a lightweight, portable jack that is controlled by a hand crank. Because of its modest size and simplicity, the scissor jack is ideal for storing with the spare tyre in small to mid-sized vehicles.

Stanley 20 Ton Capacity Hydraulic Bottle Jack ST92001CE

2. Hydraulic car jack: There are also other types of hydraulic car jack, which are automobile jacks that use hydraulic systems to elevate the car. Trolley jacks, also known as floor jacks, are enormous hydraulic jacks commonly used by technicians. Bottle jacks are a smaller type of hydraulic jack that is popular among truck owners due to their simple construction and capacity to lift higher, heavier cars.

Car jacks also have varied lift capacities, which are commonly categorised as 2-ton or 3-ton jacks, which refers to how much weight they can safely lift).

Pneumatic jacks, which use compressed air to create the mechanical energy required to lift an automobile, are also available at www.industrybuying.com.

Car jack safety precautions

Although jacking up an automobile is a simple and routine technique that anyone may conduct on their own, it is not without risk. Thousands of pounds of metal are just waiting to fall back to earth while the car is hoisted. It’s usually a good idea to take certain safety precautions to reduce the likelihood that your jack may slip or your automobile will roll off the jack.

Before you even try jacking up your automobile, make sure it is parked. The jack has considerable upward force, but it won’t be able to stop your car from rolling away. Ideally, you should even jam your tyre with a brick or piece of wood to ensure it doesn’t move. Place the jam under the tyre on the opposite side of the one you’re working on. Always set the jack squarely beneath the jacking point of your vehicle to prevent it from leaning.

Now the point you’re waiting for.

Chicago Pneumatic Jack Stand CP82020 Capacity 2 Ton

How to Jack Up a Vehicle

If you are unaware of how to jack up a car, having a jack and a spare tyre in your car won’t help you much. When changing a tyre, you’ll need to know where to set the jack, where the jack points are, and where to jack up the car while driving. Fortunately, the procedure is more daunting than difficult.

1. Begin by looking for a safe area to park your vehicle. You should strive to avoid traffic as much as possible.

2. Put your vehicle in park and block off a tyre at the opposite corner of the one you’re working on. That is, if you are changing the front right tyre, block the back left.

3. Locate your jack, which is generally under the trunk floor cover with the spare tyre. Then, locate the jacking points on your vehicle. They are typically found just behind the front wheels and in front of the rear wheels. Consult your owner’s manual if you can’t find the jacking points.

4. Place the jack beneath the jacking point. To get the jack low enough, you may need to spin it down.

5. Turn the jack handle clockwise softly until the tyre you’re changing rises off the ground. To avoid leaning, always keep the jack firmly positioned up and down while doing this.

6. After you’ve completed changing the tyre, simply turn the crank counter clockwise to return your vehicle to the ground. Replace the jack in your car, remove the tyre block, and you’re ready to go.

Conclusion

As we all know, a car jack is an essential tool to help get your car off the ground and back on the road should you ever experience a flat tyre. We’ve all been there, you’re driving down the road and then all of the sudden you hear that dreaded ‘thump’ and you know that you’ve got a flat tyre.

To lift a car up properly, you need a high-quality, sturdy and reliable car jack. Whether it’s a hydraulic car jack you’re looking at or a scissor jack, head to www.industrybuying.com for efficient products from top manufacturers around the globe.

0