How To Check The Difference of Stainless Steel 310 or 316 Flanges
Stainless Steel is an alloy metal made up of carbon, iron, chromium, nickel, molybdenum, and other metals. When all of these metals are combined in a specific proportion, we get an alloy called Stainless Steel. Stainless steel is a fantastic metal to work with. The alloy is corrosion resistant in all conditions and is far stronger than any other metal. The alloy is also commonly utilized due to its high resistance to all types of damage. Stainless steel also comes in a variety of grades, each of which is determined by the metal’s distinguishing ratio.
Stainless Steel 310
Stainless Steel comes in several grades, 310 being one of them. 310 has the highest chromium content, ranging from 24.0 to 26.0 percent, giving it a chrome appearance; the carbon content is 0.25 percent, making it much stronger; and nickel content ranges from 19.0 to 22.0 percent, giving it superior corrosion resistance. Stainless Steel 310 Flanges is very important since it contains features such as corrosion resistance and durability. As a result, the SS 310 flanges are ideal for any application. The tensile strength of the SS 310 flanges is stronger, and it has good throughness. SS 310 sheet has a tensile strength of 75000 Psi, MPa-515, with a yield strength of Psi-30000, MPa-205, and a melting point of 1402°C.
Stainless Steel 316
SS 316, which belongs to the same series as the 300, contains the same contents as the 300, but with a little change. Between 16.5-18.5 percent chromium, 0.07 percent carbon, 10-13 percent nickel, and 2-2.5 percent molybdenum. At 20°C, the Yielding Strength is 20000 MPa and the Ultimate Tensile Strength is 50000-70000 MPa. Because SS316 has more molybdenum than 304, it is far more resistant to pitting and corrosion, and temperature fluctuations have no effect on it. Although the look of stainless steel 304 and 316 may be similar, their compositions differ.
A flange is a pipe fitting that is used to join two pipes together. Flanges resemble a ring with a bore in the middle and holes all around it for bolting. A flange is usually attached in one of two ways: by bolting it together or by welding it together. It is easier to assemble or remove the flange if it is bolted, but welding is a permanent bond that cannot be undone. Welding a flange is a good alternative since it prevents the chemical from leaking. The flange is available in a variety of sizes, ranging from small to large.
Difference
The chemical proposition can be used to determine the difference between the two grades. Grades 310 and 316 include the highest chromium and nickel, whereas 316 contains molybdenum in a specific ratio. Although they appear to be identical, the chemical and mechanical qualities distinguish them. Both, however, are commonly used due to their properties. Both contain features in a proportion that allows them to be used for a variety of tasks.
0