How to sew the edges of curtains velvet?

How to sew the edges of curtains velvet?

Straight stitch method: This is the most basic stitch method. Thread the sewing thread through the two layers of the fabric, then thread the needle back above the fabric and repeat this process until the sewing is completed. Repeated stitching method: This type of stitching is usually used to sew thick curtains.

First, sew the lace and one end of the fabric length face to face, as shown in the picture. Next, use the edge locking machine to lock the edges, as shown in the figure. Then flip to the front and press a clear line of about 0.2-0.3cm, as shown in the following figure. Roll an edge of about 2cm at the other end of the fabric length, as shown in the following figure.

Manual sewing: Using thread and manually sewing for gaps. You can choose to sew with the same color or contrasting thread as the curtains. Using hot melt adhesive: Apply hot melt adhesive to the gap, and then sew the curtains together by hand. This method is suitable for situations where the material of curtains is not easily sewn.

Sewing curtain lace on your own using a sewing machine, the most common methods are usually the following two: sewing pleated lace: simply sew the fabric edge that needs to be sewn onto the curtain while pleating it. If you want the folds to be dense, keep folding them. If you want the folds to be sparse, you can take one every 4 centimeters.

Weave the fine velvet rope and cotton crochet into strips, then fix the strand of fine velvet thread at a distance of 1 centimeter from the raw edge, and sew it on the sewing machine with a wide cross shaped needle to prevent the fine velvet thread from getting stuck and stuck.

It is best to choose a thinner fabric when making double hems, as the two layers of fabric will cause greater expansion. The method of curtain lace is to use cross stitch to sew a strong velvet rope on the other side of the fabric. This way, you can evenly adjust the length of the ruffle edge trimming.