How to Reset Brother HL-2270dw and HL-2240d printers Toner

Bymary smith

 If you own either Brother HL-2270DW or HL-2240D printers then you may run into a problem with the toner light not allowing you to print. If this problem persists even after replacing the toner, then your printer may require a simple reset. To fix the problem and reset the toner sensor, just follow these simple steps to toner reset brother hl 2270dw printer

1. Open the front cover and open it while performing the following steps

2. Turn off the printer

3. While holding the printer on, hold down the Go button. All lights should now be on.

4. Release the Go button or Start button

5. Press the Go button or press the Start button twice

6. Stop and wait. All lights must be on.

7. Press the Go button or press the Start button 5 times

8. The toner light should be off now

9. The paper light must be on or flashing

10. Close the front cover

11. ready light should be the only light

12. You may need to reboot your computer to resume normal printing

If you continue to experience printer problems ever after resetting your toner, contact us at 817 442 6637. We provide printer service and repair near San Marcos, Escondido, Vista, Carlsbad, Encinitas and La Costa.