Https IJ.Start.Canon : IJ Start Canon Setup

Have purchased the ij.start.canon inkjet printer and am waiting for the first-ever printout through your printer? Then your wait is over. Here is the step-by-step guide to set up your Canon printer and takeout the first ever printout by installing the Canon drivers on your pc. Also, we have explained the wired as well as wireless printing methods that will help you a lot. So let’s begin with the Canon drivers installation and take the first-ever printout from your Canon printer.

How to set up the Canon printer using https //ij.start.Canon?

Let’s dive into the general process of ij canon setup ;

First, unbox your Canon printer and place it on a clean and plain table.
Then connect the Canon printer to your device with either method.
You can go with the wireless method or the wired method.
After a successful connection, open the same device’s web browser.
Go to https //ij.start.canon site using this web browser.
Now click on the setup button.
Here you will get three distinct methods of getting your driver information.
Enter or select the details of your printer model and then press the search button.
The driver for the selected printer model will appear.
Now download the drivers and wait till the download finishes.
Afterward, go to the downloads tab and open the drivers setup.
Follow the installation procedure to install the Canon printer drivers.
After installation, please open it and load the paper into the printer tray.
Select any document that you need to print.
Press the print button, and the printer will print the document.
This is the general setup process of a Canon printer on any device.

We have guide yout the general process of the Canon printer setup. Now let’s discuss the process in detail.

Guide Canon printer setup for Windows and Mac devices:

Below are the steps to set up the ij start Canon printer driver setup for Windows as well as Mac. Let’s go through these steps without wasting a single minute.

Download the Canon printer driver on Windows and Mac:

The first and most important step in Canon setup is downloading the Canon printer driver. Get connected to a stable internet connection and follow these steps;

Turn on the device. It would help if you had the Canon printer drivers download.

Then go to the web browser of this device.
Now, using the web browser search bar, enter the ij.start.canon link on it.

Press the search button, and it will redirect you to the official page of the Canon printer drivers.
Four buttons are on the homepage of Canon in 4 different colors.
Click on the setup button , which is present in the red color button.

This will take you to the printer model selection page.
On this page, you will get three different methods to select the Canon printer model.
The first method is to enter the Canon printer model number directly.

The model number is on the Canon printer box or the printer itself.
Then the second method is to select the first letter of the model number and the following letters.

The third method is to select the series of the Canon printer model directly .

Selecting the series will take you to the next page .

Proceed through any method so you are on the next page , i.e., the main download page.
Then selecting the model number will take you to the download page.
On the download page, you will get the details of your Canon printer.
The details are along with the picture of your printer.
So that you can verify your printer through the picture of it.
Now click on the download button present on the next page.
The webpage will automatically detect your operating system and then download the driver.
Wait for the download to complete.
Now go to the downloads folder of your device where the download location is chosen.
In this way, you can download the Canon printer driver.

Install the Canon printer drivers on Windows and Mac:

Downloading is a simple way process for both Windows as well as Mac devices. But installation is really hard as the steps are slightly different for both platforms. So let’s check the difference installation under a single head;

Go to the download location on your device or the folder where the Canon printer setup is downloaded.
Now visiting the h folder, find out the ij start canon setup file and start the setup process
Then, double-click on the file or right-click on it and then click on the open button.
This will open the setup file.
Now, if you are a Windows user, windows will ask you permission, and you must click the yes button to grant them.
You may need to enter a pin to get the application installed for the Mac device.
Simply providing permission will open the setup screen of Canon on your device.
The initialization process will run for a short time, and the main setup screen will appear.
Click on the start setup button present over the setup window.
Now it will check whether any updated version of the same drivers is available.
If it’s available, the setup will download and install it.
On the next page, you will need to select the secondary tools present along with Canon.
Select these tools according to your need.
Then tick the checkbox of agreement and privacy policy.
Selecting this checkbox, click on the install button.
Now the Canon printer will start the setup, and it will take some time to install the driver.
After some time, the finish button appears.
Click on it to finish the setup process.
Restart your PC and go.
Then you can use the driver to give a print using ij start canon printer.

How to Unbox the Canon Printer?

Unboxing any device is the most crucial step, as proper unboxing leads to the proper working of the device. So let’s unbox your ij start Canon printer;

As soon as the ij.start canon printer cursor is on your doorstep, first, you need to take the parcel and place it on a plane table.
Then, cut the main box’s upper cover to remove the main parcel from the protective boxing.
Now, an opening place is provided on the Canon printer’s main box.
Cut the sellotape provided over it and ensure that the cut is shallow.
A deep cut can harm your device and can make a loss.
You can also turn on the video recording if you have ordered the Canon printer online.
This will be easy to have an easy return or claim a refund.
Then, remove the Canon printer from the box and place it on a clean table.
Ensure the printer is placed at the center of the table, so there is enough space to connect the wirings and load up papers.
Then remove the filming present over the printer and the paper tray.
Load up some papers on the Canon ij setup printer.
Check for any external damage to your printer.
Now insert the toner into the drum if it’s a laser printer.
Connect the power cable to the printer and turn it on.
For the inkjet printer, fill up the ink provided with the printer.
Fill up the ink folders and then click on the start button.
As this is a new printer, it will take some time to have the ink loaded into the tubings.
This is the boxing of your Canon printer.

How to connect the Canon ij setup printer to any device?

ij Canon printer connects generally focuses on the printer connection with the device where the driver is installed. There are two methods of contact, i.e., wired and wireless. The wireless method is a universal method and the newest of all. But checking stability, wired stands to be best. So let’s take a deep dive into these connection methods and their details;

Wired Method of Canon printer connection:

A wired connection is the simplest as well as oldest connection method of the ij canon setup. This method is used to connect Canon printers to devices like pc, laptops as well as MacBooks where the USB port is available. So let’s setup canon by this method;

Turn on your ij.start.canon printer.
Then take the USB cable provided along with the Canon printer.
Now plug one side of the USB cable into the USB port provided on the Canon printer.
Plug the other side of the same USB cable into the USB port of your device.
Then check for the proper connection.
Now go to your device’s control panel, i.e., windows or Mac.
Then go to the devices and preference section.
Here you will get the devices and printers section.
Click on it.
The model name of your printer will appear in the list of devices connected to your pc.
Check for your printer model name on it.
If you get the model name of your printer on it, then the wired connection is set correctly.
If not, check the loosening of the USB cable from either slot.
Adjust it and try again.
This way, you can connect your ij.start. Canon printer through a wired connection to any device.

Wireless Connection of the Canon Printer:

This method of connection is used in 2 situations, i.e., when the device is far away from the printer and if the device does not have a USB port. Wifi is the main source over here. So let’s connect the Canon printer using a wireless connection.

Turn on the wifi router.
Then go to your devices, such as a smartphone or a pc.
Connect the device to the wifi router by entering its password of it.
Then go to the Canon printer screen and hold the wifi button of your printer so that the wifi adaptor of it gets activated.
Blinking the wifi button will indicate that your wifi adopter in the printer is on.
Press the menu button present on the Canon printer.
This will open the menu of the cabin printer.
Now scroll down and then select the settings tab.
In the settings tab, navigate to the network settings.
There are many options in the network settings.
Select the wireless option and then select your wifi name.
The list will show you the wifi name of your router.
Selecting the name, enter the password for your wifi.
THen entering the password, click on the connect button using the printer arrow and ok keys.
Now the success symbol appears on the ij start Canon printer screen indicates that you are connected to the Canon printer.
You can also confirm it by going to the control panel of your device and then visiting the printers section.
This is the wireless connectivity of Canon printers.

How to Set Up a Canon Printer for My Android Smartphone?

Connect the Canon printer to the Android smartphone through the wireless connection and then follow the steps given below;

Go to the Google Play Store .
Then search for the ij.start.canon application.

The application named on the Play Store is canon utility.
Go to the details of this application.
Press the install button.

They will start downloading the Canon printer application for you.
Now after the download, the installation of the Canon printer begins.
It will finish in a few seconds, depending on your internet speed as well as the process of your smartphone.
Now open the application.
Then click on the setup button.

After this, allow the permissions for the application.
Now a plus sign will appear in the middle of this application.
Click on it to add up your Canon printer over here.
Now connect the smartphone to the wifi connection where your Canon printer is connected.
Now the list will show you the model name of your Canon printer.
Select the name and then click on the connect button.
Select any document from your smartphone.
Open the document using the Canon utility application.
Then press the print button.
This will take a wireless print from your Canon printer.

Note : You can use these steps to set up a Canon printer on an Android device too. There are some minute differences that you will be able to notice and proceed with them.

How to Set Up the Canon Printer Using a CD Player?

Every ij start Canon printer comes with a CD player so that you can also perform the setup offline without the internet. So here are the steps for https://ij.start.canon setup using a CD ROM;

Turn on your device and then insert the CD into the CD player of the device.
But for this, your device must have a CD player.
So insert the CD into the CD player and then press the button.
Now the device will start processing the CD ROM.
It will appear on this PC section of your Windows device.
Go to this PC section.
Then right-click on the Canon CD ROM.
Click on the Run as administrator button.
Now allow your Windows or Mac to proceed with the installation of the Canon ij printer drivers.
Give permissions, and the setup screen will appear.
First, select the setup language.
Then press the setup button.
Now select your country and then press the next button.
Now it will check for the connectivity of the setup canon printer to your device.
After this, select the additional tools that you want with your Canon printer driver.
After selecting it, go for the agreement reading.
Tick the agreement checkbox and click on the install button.
Now the installation process will begin.
It will take a few minutes to install the setup on your device.
After the installation, the finish button will appear.
Click on the finish button and then restart your pc.
Then open the https ij.start.canon driver using the Canon icon.
You can set up the Canon ij printer drivers using the CD ROM.

Note : This is an outdated method. Nowadays, there is the online availability of the ij canon setup on the ij start Canon website. But still, many users do use this method for getting the Canon driver set up.

How to Take a Printout of Any Document Using a Canon Printer Installation Guide?

If you are new to the Canon printer and have completed its setup but waiting to take your first-ever printout, then this context is for you. Follow these steps to take a printout;

Open the document that you need to have a printout.
Then, go to the menu bar of the application to open the document.
Then go to the print section.
Or press “Ctrl+P” to open up the print menu.
In print, the menu selects the Canon ij setup printer from the list of printers available.
Now choose the number of pages you need to print from the document.
You can also set the page number manually.
Then select the number of copies you want for the document.
You can also choose the format of print.
Now insert a sufficient amount of paper in the paper tray of the Canon printer.
After this, press the print button.
The Canon printer will print out the document for you.
So this is the proper way of printing any document on the Canon printer.

How to Take a Scan Using the Canon Printer’s Inbuilt Scanner?

An inbuilt scanner is provided along with your printer. So to scan any document, follow the steps provided below;

Turn on the printer.
Then insert the document or image into the scanner.
Close the scanner lid.
GO to the Canon drivers.
Go to the scan section.
Select the quality as well as the document type.
Then press the scan button.
This will scan any document for you using the ij.start.canon printer scanner.

How to Load Up Pages in the Paper Tray of My https://Ij.start.canon Printer?

Loading the ij start canon printer tray with paper is an easy task, yet many of them face problems with it. So here is the best and easy way to load up the papers into your Canon printer tray;

Open up the Canon printer tray.
Then remove the paper from the paper rim.
Place the paper according to the size mentioned on the paper tray.
After this, take the paper pointer towards the paper so it remains spiked to the tray.
This is loading up of papers into the Canon printer paper tray.