How to Fix Error Code 006 in Canon Printers? 

ByAmeliakumar
unnamed (1)_11zon

When running their Service Tool, Canon printers frequently display the error code 006. This device is used to reset your Canon printer, and while your printer is being reset, you run into the canon service tool error 006.

When your Canon printer reaches its print limit, you can reset the print counts on the ink pad counter using a service tool. When placed beneath the print head of your Canon printer, they function as a cleaning.

When we need to obtain many prints, it is put into action. Your printer locks into print mode and requires Service Tool programs to be activated.

Reasons For the 006 Error

This issue with your printer might happen for some different reasons. Among the potential causes are:

  • The Canon printer is not functioning.

  • incorrectly selected service mode

  • The ink cartridges for the printer are broken

  • Ink running low in the cartridges

  • a USB port that isn’t functioning properly and can’t deliver commands

  • Your Canon printer is incompatible with the service tool you are using.

How is Error Code 006 Fixed?

There’s no need to freak out if your printer displays the error code 006 canon service tool. Instead, remember to take preventative measures and rehabilitation measures to handle the problem.

The steps listed below can be used to remove error code 006:

Look over the ink cartridges.

The ink cartridges have a significant impact on how well your printing works. As a result, you must verify that the cartridges are set up correctly and are not dried out or depleted of ink. You can receive the error code 006 if any of these are incorrect.

The copper cartridge connectors located at the printer’s front can also be carefully examined. Ensure the connectors have been thoroughly cleaned inside as well.

Examine the printer drivers.

If you performed the first step but were unsuccessful, you can remove your printer driver and reinstall it while turning off your computer and printer later. Turn your devices back on after some time to see whether the issue still exists.

Launch the Service Tool

The Service Tool for your Canon printer should be thoroughly checked and verified to work with the printer model. If the issue still exists after being validated, consider restarting the tool according to the instructions in the package’s manual.

Repair your service tool.

Follow the steps below to troubleshoot:

  • Using the guidelines provided, turn on the printer’s maintenance mode now:

  • Offset your printer.

  • It should be connected to the CPU with a USB cable.

  • Once the LED light starts to shine, press and hold the Resume button before pushing the Power button.

  • Holding the Power button while releasing the Resume button. The button for Resume must now be hit 6-7 times.

  • Release both buttons after that. This will cause the LED light to blink briefly before turning off, indicating the maintenance mode is active.

  • Start your printer’s service tool now.

  • Pick the appropriate USB port from the list of choices in the Service Tool.

  • Next, select the Main option from the Ink Absorber Counter.

Choose the closest number to the counter number in the Counter Value area, then click Set. The counter number can be verified in the EEPROM.