How to Install Fiber Cement Siding?
The demand for more skilled and prepared installers is rising as fibre cement siding gains popularity and more people realise how valuable it is for defending and enhancing their houses. More people than ever need to understand how to install siding properly. While installing fibre cement siding is comparable to installing wood siding in many respects, there are a few distinctions that must be taken into account for it to be done correctly even if you have hired one of the siding contractors in Kennesaw for the job.
Trimming TheFiber Cement
For the smoothest cuts, always cut the fibre cement boards upside down. Best practises for sidings that produce dust include using dust masks and cutting equipment that reduce the quantity of dust generated. Even tools exist that enable a dust-free installation.
Priming & Painting
There are many lovely colors and stains available for fibre cement boards that may be bought ready to install. Or you might prep them locally and paint them. Regardless of the technique, all siding cut ends must be painted with latex paint before installation. Usually, the person who is cutting the siding does this at the saw. It may be installed right away.
Siding Installation
When employing a conventional, horizontal lap application, you will place the fibre cement boards from the bottom up like typical siding. You’ll start out with a starting strip that has weep holes so that moisture may easily escape. A clearance from grade that complies with installation guidelines or local building requirements, whichever is higher, is required. After that, you would put in your window and corner trim made of fibre cement.
What nails to use for Hardie siding
Nail your first course of siding into the studs 1 inch below the top of the siding, 14 inch below the beginning strip. Use galvanised siding nails, and make sure they pierce the frame at least 1-1/4 inches.Don’t push the nails too deeply. Keep the siding-level nails in place. In order to facilitate water runoff, it is also advised to install a flashing strip behind each butt joint.
Continue putting in each course while leaving the gaps that the manufacturer specifies at all trim points, such as those around windows and doors and at the borders of the installation where caulk will be applied. Except for wider widths, fibre cement siding is held in place by a single nail that is covered beneath the lap siding in front of it.Flashing should be placed over any horizontal terminations, such as those above windows, doors, and other protrusions in the siding, just like with any other siding installation. Each horizontal termination of the flashing, for example, should have a space of one inch between the siding and the flashing. You will caulk the vertical spaces between the siding and trim once the siding is fully attached.
As long as it complies with rules and specifications, fibre cement siding can be put over foam insulation up to one inch thick.
Choosing The Right Siding Contractor
The role of a siding contractor is very important due to various reasons. For example, you won’t love to get into things like how to secure Hardie board, what nails to use for Hardie siding, and others. this is why choosing from the best siding companies in Marietta would make things quite easy for you.
The Conclusion
Are you in search of a reliable contractor for fiber cement siding installation in Roswell GA? If yes, Siding Depot can be the most perfect choice for all types of siding jobs be it installing vinyl siding in Acworth or doing siding repair. It is one of the best siding contractors in Kennesaw.
Disclaimer- The information provided in this content is just for educational purposes and is written by a professional writer. Consult us to know about the installation of fiber cement siding.
END OF THE DOCUMENT