Input article bodHow Does a primary Hypodermic injection Outboard Motor Work

Direct hypodermic injection is generally used in case of internal combustion motors. These motors are basically used in the modern 2 stroke motors as well as 4 stroke motors. In these motors, the petrol is pressurized first and then it is being injected into a combustion chamber with the help of a fuel line. This technology differs from the others from the conventional technology, and this does not involve the multipoint fuel hypodermic injection that takes place in the storage container port or intake tract.

There are many advantages of using a direct hypodermic injection outboard motor engine. High power output and increased fuel efficiency are among the two biggest advantages of these motors. In addition to it, the being injected fuel leads to the cooling effect and smoothly sent out mixture allow for far more aggressive ignition timing. If you have direct hypodermic injection outboard motor with you then you can control the numbers of emission or polluting of the environment. This happens mainly because of more precise control of the fuel as well as hypodermic injection timings that are varied according to the condition of load.

In these motors the engine speed is usually controlled by engine management system or EMS, as it is popularly known. It adjusts the ignition timing and fuel hypodermic injection function, instead of having a throttle plate that confines the method of getting air. Apart from this function cxl 300 ii, the engine management system requires enhancement of memory and processing so as to ensure good drivability and performance. Unlike the carbureted or fuel being injected motors, there are hardly any throttling losses in some direct motors, thereby reducing the putting losses, improving efficiency in engine.

The concept of hybrid technology has made direct hypodermic injection outboard engines even more popular. Now you can find direct hypodermic injection supported with various other technology like Water Hypodermic injection, Variable Control device Timing and Ultra Lean Combos etc.

These technologies have made it possible to provide the fuel in multiple times during a single cycle, thereby resulting in more economy and power. Due to this reason, most of the companies are switching to this technology in their normal running.

Now with almost all the major outboard motors manufacturers making use of these technologies and coming out with a wide range of direct hypodermic injection engines you will face a difficult time in choosing one. All you need to do is to gather as much information as possible and then make a wise and logical decision. Do not get away with the lucrative ads that you see but check on the specification of the motors so as to see which of them cater to your needs.

Direct hypodermic injection engines are more appropriate in case of 2 stroke motors, for the reason that want to eliminate the polluting of the environment emission levels. In 2 stroke motors, the intake ports and exhaust both are opened at the same time, thus a large area of unburned fuel get out of exhaust port. However with direct hypodermic injection only air comes out of the crankcase, resulting in reduced emission. ymca here…