How to Wi-Fi Connect a Canon Printer Guide

Bymatthew paulson

Canon printers provide both USB and wireless interfaces. The preferred connection option in most cases is USB mode, while Wireless mode is preferred if you want to share the printer over a network and print wirelessly. There may be multiple ways How To Connect Canon Printer To Wireless Network depending on the kind of printer. With the LCD control panel, you may rapidly configure printers with LCD panels. Whereas you may use Canon’s official setup utility to connect all other models to Wi-Fi.

How can I connect my Canon printer to WiFi?

The Canon Printer Setup Wireless is not too difficult. There is a requirement to switch on the Canon printer. Before you start the connection process, make sure the ink cartridges are installed. Now when you are close to the access point, you must press and hold the WPS button for a few seconds. The router will locate and establish a connection with your printer. If you experience any connectivity problems, you may contact a geek for help online.

  • The first step is to unpack your printer.
  • Put the power lead in place.
  • Before starting the printer, put the ink cartridges in.
  • Press the WPS button on your printer and router.
  • Make sure both devices can support the WPS feature.
  • Without a doubt, WPS may be used to wirelessly connect the printer and router.

This will establish the connection and enable you to use a printer to print. If you ever face any problems, you should always seek the advice of troubleshooting professionals.

About multipurpose printers with LCD screens

The MF112 and MF113W printers from the Canon MultiFunction series provide a large control panel screen in addition to a variety of print functions. Such printers have simple access to Wi-Fi settings, so you may configure them to connect to Wi-Fi.

  • Choose Menu from the home screen of your printer.
  • Click OK next to Network Settings.
  • Select Wired/Wireless should be chosen as the first option.
  • Choose Wireless LAN on the following screen.
  • Right away, access the Wireless LAN Settings.
  • Choose SSID Settings.
  • Tap an Access Point to choose it. The procedure will start searching for nearby Wi-Fi networks.
  • Choose a network.
  • Enter the WiFi password.
  • With the Switch Entry Mode option, entries can be entered in uppercase, lowercase, or symbol form.
  • Choose Apply once you’ve completed entering the password.
  • On the pop-up menu, select Yes.
  • You will get a Connected notification as soon as the printer is connected to Wi-Fi.

References: How To Setup Canon Printer Wifi