Microsoft DP-100 Trustworthy Source – DP-100 Free Braindumps
DP-100 Trustworthy Source, DP-100 Free Braindumps, DP-100 Complete Exam Dumps, DP-100 New Exam Camp, Valid Test DP-100 Bootcamp, New DP-100 Test Sims, Latest DP-100 Test Blueprint, DP-100 Valid Test Practice, New DP-100 Dumps Book, DP-100 Exam Simulator, Reliable DP-100 Exam Online
And our DP-100 learning materials can save a lot of time for its high efficiency, Our DP-100 practice materials do not need any ads, their quality has propaganda effect themselves, You can take the Microsoft DP-100 training materials and pass it without any difficulty, Most of you candidates must have been stopped by the rather complex and difficult Microsoft DP-100 test, and most of you must have complained about the tiresome learning process of long-time paper study, Microsoft DP-100 Trustworthy Source As an old saying goes: time and tide wait for no man, the same is true when it comes to time in preparation for the exams.
Believe me if there is anyone who could help you out in the Microsoft DP-100 Free Braindumps exam, it’s these guys, so do contact them, Although the vulnerability exists theoretically, there is no exploit yet developed for it.
Greg Karp is a lifesaver for people worried (https://www.dumpsquestion.com/DP-100-exam-dumps-collection.html) about stretching their dollars in a tough economy, There is a per-service security IDthat means each service has its own ID with DP-100 Complete Exam Dumps permissions that can be specific between the service and the resources being accessed.
Alison can be reached at [email protected], And our DP-100 learning materials can save a lot of time for its high efficiency, Our DP-100 practice materials do not need any ads, their quality has propaganda effect themselves.
You can take the Microsoft DP-100 training materials and pass it without any difficulty, Most of you candidates must have been stopped by the rather complex and difficult Microsoft DP-100 test, and most of you must have complained about the tiresome learning process of long-time paper study.
Free PDF Quiz Microsoft – DP-100 – Pass-Sure Designing and Implementing a Data Science Solution on Azure Trustworthy Source
As an old saying goes: time and tide wait for no man, the same is true (https://www.dumpsquestion.com/DP-100-exam-dumps-collection.html) when it comes to time in preparation for the exams, You can download learning materials to your mobile phone and study at anytime, anywhere.
So our DP-100 latest dumps are highly effective to make use of, Test engine and online test engine both are a simulation of actual test; you can feel the atmosphere of DP-100 real exam by test engine and online version.
Our DP-100 study materials are willing to stand by your side and provide attentive service, and to meet the majority of customers, we sincerely recommend our DP-100 practice guide to all customers, for our rich experience and excellent service are more than you can imagine.
In addition, we have never been complained by our customers about this problem, Things can go in your favor in the DP-100 updated cbt if you keep on using the tools of DumpsQuestion.
Microsoft DP-100 Trustworthy Source Exam | Best Way to Pass Microsoft DP-100
Download your DP-100 Dumps.
Download Designing and Implementing a Data Science Solution on Azure Exam Dumps
NEW QUESTION 29
You are performing sentiment analysis using a CSV file that includes 12,000 customer reviews written in a short sentence format. You add the CSV file to Azure Machine Learning Studio and configure it as the starting point dataset of an experiment. You add the Extract N-Gram Features from Text module to the experiment to extract key phrases from the customer review column in the dataset.
You must create a new n-gram dictionary from the customer review text and set the maximum n-gram size to trigrams.
What should you select? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
Vocabulary mode: Create
For Vocabulary mode, select Create to indicate that you are creating a new list of n-gram features.
N-Grams size: 3
For N-Grams size, type a number that indicates the maximum size of the n-grams to extract and store. For example, if you type 3, unigrams, bigrams, and trigrams will be created.
Weighting function: Leave blank
The option, Weighting function, is required only if you merge or update vocabularies. It specifies how terms in the two vocabularies and their scores should be weighted against each other.
References:
https://docs.microsoft.com/en-us/azure/machine-learning/studio-module-reference/extract-n-gram-features-from-text
NEW QUESTION 30
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Python script named train.py in a local folder named scripts. The script trains a regression model by using scikit-learn. The script includes code to load a training data file which is also located in the scripts folder.
You must run the script as an Azure ML experiment on a compute cluster named aml-compute.
You need to configure the run to ensure that the environment includes the required packages for model training. You have instantiated a variable named aml-compute that references the target compute cluster.
Solution: Run the following code:
Does the solution meet the goal?
- A. No
- B. Yes
Answer: B
Explanation:
The scikit-learn estimator provides a simple way of launching a scikit-learn training job on a compute target. It is implemented through the SKLearn class, which can be used to support single-node CPU training.
Example:
from azureml.train.sklearn import SKLearn
}
estimator = SKLearn(source_directory=project_folder,
compute_target=compute_target,
entry_script=’train_iris.py’
)
Reference:
https://docs.microsoft.com/en-us/azure/machine-learning/how-to-train-scikit-learn
NEW QUESTION 31
You need to implement a new cost factor scenario for the ad response models as illustrated in the performance curve exhibit.
Which technique should you use?
- A. Set the threshold to 0.5 and retrain if weighted Kappa deviates +/- 5% from 0.45.
- B. Set the threshold to 0.75 and retrain if weighted Kappa deviates +/- 5% from 0.15.
- C. Set the threshold to 0.05 and retrain if weighted Kappa deviates +/- 5% from 0.5.
- D. Set the threshold to 0.2 and retrain if weighted Kappa deviates +/- 5% from 0.6.
Answer: A
Explanation:
Explanation
Scenario:
Performance curves of current and proposed cost factor scenarios are shown in the following diagram:
The ad propensity model uses a cut threshold is 0.45 and retrains occur if weighted Kappa deviated from 0.1
+/- 5%.
NEW QUESTION 32
You create an experiment in Azure Machine Learning Studio. You add a training dataset that contains 10,000 rows. The first 9,000 rows represent class 0 (90 percent).
The remaining 1,000 rows represent class 1 (10 percent).
The training set is imbalances between two classes. You must increase the number of training examples for class 1 to 4,000 by using 5 data rows. You add the Synthetic Minority Oversampling Technique (SMOTE) module to the experiment.
You need to configure the module.
Which values should you use? To answer, select the appropriate options in the dialog box in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/machine-learning/studio-module-reference/smote
NEW QUESTION 33
You are moving a large dataset from Azure Machine Learning Studio to a Weka environment.
You need to format the data for the Weka environment.
Which module should you use?
- A. Convert to ARFF
- B. Convert to Dataset
- C. Convert to SVMLight
- D. Convert to CSV
Answer: A
Explanation:
Use the Convert to ARFF module in Azure Machine Learning Studio, to convert datasets and results in Azure Machine Learning to the attribute-relation file format used by the Weka toolset. This format is known as ARFF.
The ARFF data specification for Weka supports multiple machine learning tasks, including data preprocessing, classification, and feature selection. In this format, data is organized by entites and their attributes, and is contained in a single text file.
References:
https://docs.microsoft.com/en-us/azure/machine-learning/studio-module-reference/convert-to-arff Prepare data for modeling Testlet 1 Case study Overview You are a data scientist in a company that provides data science for professional sporting events. Models will use global and local market data to meet the following business goals:
* Understand sentiment of mobile device users at sporting events based on audio from crowd reactions.
* Assess a user’s tendency to respond to an advertisement.
* Customize styles of ads served on mobile devices.
* Use video to detect penalty events
Current environment
* Media used for penalty event detection will be provided by consumer devices. Media may include images and videos captured during the sporting event and shared using social media. The images and videos will have varying sizes and formats.
* The data available for model building comprises of seven years of sporting event media. The sporting event media includes; recorded video transcripts or radio commentary, and logs from related social media feeds captured during the sporting events.
* Crowd sentiment will include audio recordings submitted by event attendees in both mono and stereo formats.
Penalty detection and sentiment
* Data scientists must build an intelligent solution by using multiple machine learning models for penalty event detection.
* Data scientists must build notebooks in a local environment using automatic feature engineering and model building in machine learning pipelines.
* Notebooks must be deployed to retrain by using Spark instances with dynamic worker allocation.
* Notebooks must execute with the same code on new Spark instances to recode only the source of the data.
* Global penalty detection models must be trained by using dynamic runtime graph computation during training.
* Local penalty detection models must be written by using BrainScript.
* Experiments for local crowd sentiment models must combine local penalty detection data.
* Crowd sentiment models must identify known sounds such as cheers and known catch phrases. Individual crowd sentiment models will detect similar sounds.
* All shared features for local models are continuous variables.
* Shared features must use double precision. Subsequent layers must have aggregate running mean and standard deviation metrics available.
Advertisements
During the initial weeks in production, the following was observed:
* Ad response rated declined.
* Drops were not consistent across ad styles.
* The distribution of features across training and production data are not consistent Analysis shows that, of the 100 numeric features on user location and behavior, the 47 features that come from location sources are being used as raw features. A suggested experiment to remedy the bias and variance issue is to engineer 10 linearly uncorrelated features.
* Initial data discovery shows a wide range of densities of target states in training data used for crowd sentiment models.
* All penalty detection models show inference phases using a Stochastic Gradient Descent (SGD) are running too slow.
* Audio samples show that the length of a catch phrase varies between 25%-47% depending on region
* The performance of the global penalty detection models shows lower variance but higher bias when comparing training and validation sets. Before implementing any feature changes, you must confirm the bias and variance using all training and validation cases.
* Ad response models must be trained at the beginning of each event and applied during the sporting event.
* Market segmentation models must optimize for similar ad response history.
* Sampling must guarantee mutual and collective exclusively between local and global segmentation models that share the same features.
* Local market segmentation models will be applied before determining a user’s propensity to respond to an advertisement.
* Ad response models must support non-linear boundaries of features.
* The ad propensity model uses a cut threshold is 0.45 and retrains occur if weighted Kappa deviated from
0.1 +/- 5%.
* The ad propensity model uses cost factors shown in the following diagram:
* The ad propensity model uses proposed cost factors shown in the following diagram:
* Performance curves of current and proposed cost factor scenarios are shown in the following diagram:
NEW QUESTION 34
……
