The Question is, What is a Pressure Transducer?

In its most basic terms, a pressure transducer measures the pressure exerted on its sensing mechanism and change it to an electrical signal. They are most commonly used to calibrate the pressure that a gas or liquid exerts under variable conditions. They are widely used in aeronautics and oceanographic vehicle manufacture. Various types are made with special conditions in mind, such as measuring pressure exerted in a vacuum or when the gas or liquid is exposed to an extreme range of temperatures. The measurements are then recorded onto data loggers. pressure transmitter for process control

For example, the most widely used and economical transducer is the strain gauge type. When pressure is exerted on a diaphragm, strain is placed on the instrument gauges. This is then converted to an electrical signal.

The output can take three different forms. Millivolt output transducers are among the least expensive type. They are most useful when the distances involved are short and the environment does not feature a lot of electrical noise. A consistent power supply is necessary for the most accurate readings.

Voltage output pressure transducers are less susceptible to electrical noise. The power supply is also not as important as with millivolt transducers. The final type of output is a 4-20 mA output pressure transducer, sometimes called a pressure transmitter. These types are often used when lead wires must span a long distance. Least susceptible to electrical noise and power fluctuations, these types can utilize lead wires of around 35 yards or more. pressure transmitter for vitalization system

Pressure transducers are further categorized based on other factors. The type of sensor and type of pressure is one indicator. Absolute sensors test in a true absolute vacuum. Gauge sensors test relative pressure. Differential pressure sensors test the difference between two or more pressures. And a sealed sensor is calibrated and then sealed to measure pressure in terms of a known pressure, usually at sea level.

Pressure transducers are also classified into two basic categories. The first are the force collectors, which use a bellows, piston, or diaphragm. The second category is basically all transducers that are not force collectors, and encompasses thermal and resonant transducers. Strain gauge transducers fall in the category of force collectors, as are capacitive transducers commonly used to take readings under low pressures. Piezoelectric transducers, which are often used to test combustion in automobile engines, are also force collectors. The resonant and thermal transducers check the density of a test gas while under pressure, and are often used to take multiple readings over an extended length of time.

Visit Here: pressure transducer for air conditioning