Fix Canon Printer Error Code 6000

ByBruce Hank

Solution To Fix Canon Printer Error Code 6000

Canon Printers are hailed for the experience they provide of printing to the users. The prints have the best clarity and quality. Other products by Canon are equally loved as well. Even though the printers perform majestically on the daily basis as well, there can arise some problems and errors that may baffle you in an instant. If you have recently faced the error 6000 with your printer then it means, it needs an instant fix. This error may occur is her is any debris or foreign object stuck in the printer. It causes you system to shut down automatically. If you want a solution to this then proceed below.

 

  • You need to clear LF and EJ slit film with a non-corrosive solution if you suspect any scratched or smeared line on the feed.

  • Now, also check for any kind of debris or other object stuck in the printer which will surely cause problems.

  • If you suspect any damage to the inner parts, then check it thoroughly and replace the damaged parts.

Another method to fix this problem is:

  • For a few minutes, unplug the power cord of your printer from the power source.

  • Now connect it again and this time, turn on the printer.

  • At this point, press and hold power button for 5 seconds. After this, press the stop button two times.

  • Now, release the power button of your printer slowly.

  • Here again, press the Stop button for four times.

  • This should get you out of this error for good.

Content Source-  https://justpaste.it/91art