Where is the WPS Button on My Netgear Router?

The latest Netgear router models have advanced cyber threat protection. It provides a stable and quick network connection service. It offers best-in-class speed, power, and performance to the network. The new models have a WPS button that enables you to create a network connection and change the status of network security

The Nighthawk WPS button helps you connect your device to the router. Nevertheless, there are users who don’t know where the WPS button of my router is located. Also, they don’t know how they can enable and use it. 

Where is The WPS button On Your Router Located? 

Are you searching for the WPS button on your Netgear router? if yes, then you can easily find the WPS button on your router. It is generally located at the back of your router. Nevertheless, it is going to look different on different models of your router.

In some models, you can see the WPS label on it. However, there are models where you can see the icon instead of the label. In case you are familiar with this icon, then you will be able to locate this button easily on your router.  

Plus, you don’t have to stress out if you can’t see the Nighthawk WPS button at the back of your router device. You may find that the location is different based on the model of your router. You can usually find it on the backside of your router. When you see that button, you press it and go ahead with the connection process.

How Can I Enable The WPS Button On My Netgear Router? 

Once you find the WPS button on my Netgear router, just connect your router to the device.

Below are the step-by-step instructions that you need to follow to turn on the WPS button on my Netgear router. 

Step 1: In the first step, you need to make sure that your router is turned on. If that’s not the case, then you can turn on your Netgear router. 

Step 2: Now, you need to place your device close to the router. 

Step 3: After that, search for the WPS button on your router. You can usually find it at the back of your router device. 

Step 4: Then, you need to press the Nighthawk router WPS button.Step 5: Keep in mind that the WPs button remains activated only for 2 minutes. 

Step 6: Then, you are going to take 2 minutes to form a connection. 

Step 7: Carry out the instructions appearing on your computer screen and press the Netgear router WPS button in the next two minutes. 

Step 8: After that, your device will get connected to a wireless network. 

How Should I Specify WPS Settings On My Router?

If you wish to know how to specify the WPS settings on my Netgear Nighthawk router. 

Step 1: Firstly, open a browser on your PC that is connected to the network. 

Step 2: After that, go to the search bar and then enter www.routerlogin.net in the address bar of your browser. 

Step 3: Now, you need to enter login information such as username and password. Enter admin in the username section and password in the password section. Don’t forget that the username and password are case-sensitive. 

Step 4: Once you are done entering your login information, the home page will open up before you. 

Step 5: Search for the Advanced option and then select Advanced setup. 

Step 6: Then, you need to go to Wireless settings. After that, you are going to see the PIN field of your router, which will display the PIN used by the registrar for the configuration of the wireless settings of your router through WPS. 

Step 7: After that, you need to select the checkbox that is given next to the present wireless settings. 

Step 8: When you are done clearing the checkbox, you will see a wireless client, which will use WPS for connecting to the router. Now, the settings will be changed to a new SSID and security key. 

Step 9: Click on Apply.